Info: bent tie rods again

[fastgreek]

, well i went to the track tonight, i made one pass 13.8 @99 mph shitty 2.0 60ft, come back around to hot lap it, start staging , stepped on gas to much, i do a 4wd burnout to the left and there goes my steering wheel to the right.Damn, 2nd time this happened to me.Now i need to beef up my steering, i have the sleeves installed, what else am i gonna need so this shit doesn't happen again?

 

[x MadMAX DIESEL]

what actually bent or snapped?

 

[fastgreek]

tire rod bent on drivers side

 

[03 D-max]

You need a solid SS centerlink and cognito support kit

 

[fastgreek]

You need a solid SS centerlink and cognito support kit

getting both of these will eliminated bending the tie rods again ?

 

[03 D-max]

It did with my truck. Also lower your T-bars when you go to the track to much angle is harder on tierods

 

[fastgreek]

thanks so much, this shit sucks, i am gonna order then tonight or tomorrow, thanks again

 

[Pure Diesel]

What size tires and rims are you running?

 

[Big Block 88]

Center link and braces will help alot, but if you are leaveing your bars cranked that is hurtin you aswell.

 

[fastgreek]

What size tires and rims are you running?

stock wheels and tires for now.

 

[fastgreek]

how do you adjust torsion bars, never did this before?

 

[fastgreek]

well i just ordered the Cognito HD Tie Rod Assembly for 01-09 GM HD Silverado from alligator performance and the centerlink from dmaxstore.

 

[Big Block 88]

That should help alot.

 

[8100 Power]

What PSI or RPM are you leaving at?

 

[03 D-max]

the t bars are long bars that extend from your front suspension to about the middle of your cab. if you look under the truck you will see there are bolts on the cab end of the bars that are pointed up. These are the bolts you loosen to lower the front of your truck the lower you go the better the angle on your tierods.

 

[03 D-max]

You should also buy the ppe pitman/idler arm braces from alligator (cognito makes them)

 

[fastgreek]

as soon as i get these items installed i will have to do this , thanks

 

[fastgreek]

what about Cognito Pitman & Idler Arm Braces, do i need this with my set up, will it help me? http://www.alligatorperformance.com/product_info.php?products_id=3192

 

[fastgreek]

What PSI or RPM are you leaving at?

close to 8- 10 psi roughly

 

[fastgreek]

You should also buy the ppe pitman/idler arm braces from alligator (cognito makes them)

didn't see you posted that, sorry