Another one

[clrussell]

Need some 26” rims and 30” tires now

Whatever your fancy is. just send me a card number

 

[Chevy1925]

Nice Corbin!

 

[SmokeShow]

The altitude adjustment looks good. :thumb:

 

[RobsDmax]

Needs these 20x12 Welds I have.

 

[cdbright]

hell , just go for it and run that exhaust out the hood :thumb::thumb::thumb:

 

[clrussell]

Needs these 20x12 Welds I have.

Yes it does

 

[clrussell]

Anyone want to buy this thing? I need to sell it

 

[clrussell]

Slowly but surely updates

 

[clrussell]

 

[clrussell]

Researching nv4500 205 combos has me loosing my mind

 

[lutzjk913]

Glad to see you work on this some.

 

[Burn Down]

Researching nv4500 205 combos has me loosing my mind

I thought you just needed a 205 with a round bolt pattern off of a th400?

 

[Burn Down]

Shackle flip looks good:thumb:

 

[clrussell]

I thought you just needed a 205 with a round bolt pattern off of a th400?

yes. if you want to buy the $600 adapter

 

[Chevy1925]

Researching nv4500 205 combos has me loosing my mind

no, youre just making this hard :roflmao:

did you look more into that dodge setup?

 

[clrussell]

I have a dodge nv4500 for reference

 

[clrussell]

no, youre just making this hard :roflmao:

did you look more into that dodge setup?

yes, they are damn near impossible to find

 

[frankenstien]

is there a reason the front hanger is lowered? or just to lift the truck more? ive never seen that before

and yeah the trans to transfer case adapter stuff gets expensive.

i was curious and googling

https://behemothdrivetrain.com/products/divorced-input-conversion?variant=1324816728078

i don't know anything about the company, but they make a kit to turn the standard 6 bolt 205 into a divorced unit, have to add another 100$ to buy their machined yolk for the kit. Not the cheapest, but then wouldn't have to adapt the trans to a transfer case, just an idea

 

[clrussell]

is there a reason the front hanger is lowered? or just to lift the truck more? ive never seen that before

and yeah the trans to transfer case adapter stuff gets expensive.

i was curious and googling

https://behemothdrivetrain.com/products/divorced-input-conversion?variant=1324816728078

i don't know anything about the company, but they make a kit to turn the standard 6 bolt 205 into a divorced unit, have to add another 100$ to buy their machined yolk for the kit. Not the cheapest, but then wouldn't have to adapt the trans to a transfer case, just an idea

helped correct pinion angle and added a little rear lift. im trying to stay away from blocks, plus I only needed an inch.

thanks for that link, but if im going to spend that much a little more to make it mated will be worth it.

 

[Chevy1925]

and stay the hell away from Behemoth. he will take your money, make you a ton of empty promises and you will never see your parts. Ive seen plenty of people taken for a ride by him on Pirate4x4