Even better..too bad I already bought the $10 one.
Yours was probably better anyways
,This one was a thick plug and would probably protrude the intake.:grd: Hondarider
Air intake heater delete?
- Thread starter hondarider552
- Start date
Yours was probably better anyways
,This one was a thick plug and would probably protrude the intake.:grd: Hondarider
Well it seems like mike has the AIH deletes being cut out this week. i'll grab one and test it out, if it fits
LB7 plug is M22x1.5. I bought a standard hex pipe plug from MidState Bolt for $5.
A boost tap would be an excellent idea.....
I like how MMLMM is coming to the fore with this. Dang good ideas.
A boost tap would be an excellent idea.....
I like how MMLMM is coming to the fore with this. Dang good ideas.
super diesel
<<<< Under Pressure
I never made these because JK has always supplied them. He has always be respectful enough not to copy my stuff, so I won't do it to him. I'll always have respect for inovators own ideas and products. I think I'm a dieing breed.
Last edited:
I looked around today at the AIH, and had a question.
In the first pic there is the green plug where my finger is pointing. Is that the sensor for the incoming air temp?
Also in the second pic, under the little black cap on the top of the AIH is a red power cable, to power the heater, mike is this the same in your LMM?
In the first pic there is the green plug where my finger is pointing. Is that the sensor for the incoming air temp?
Also in the second pic, under the little black cap on the top of the AIH is a red power cable, to power the heater, mike is this the same in your LMM?
Last edited:
theres many ways to do something, but in the end were doing exactly the same thing. Don't think I am copying anyone. I started with cutting the top of mine off with a saw, then dis-assembling it so it was only a spacer. Its at this point I decided I and most others would want to do it in a non-"hack-job" kinda way.
Last edited:
super diesel
<<<< Under Pressure
Update!!!!!!!!!!
Here is the prototype. I made it from a stock heater grid.
The ones I am making will be cut on a waterjet and wont have the squares in the corner. They will look much nicer and cleaner.
Here is the prototype. I made it from a stock heater grid.
The ones I am making will be cut on a waterjet and wont have the squares in the corner. They will look much nicer and cleaner.
looks really good mike! Add me to your list. Maybe a beta tester?
I assume the 2 ports 90* from each other are either to be used for the drugs or boost tap?
I assume the 2 ports 90* from each other are either to be used for the drugs or boost tap?
looks really good mike! Add me to your list. Maybe a beta tester?
I assume the 2 ports 90* from each other are either to be used for the drugs or boost tap?
the holes in the one shown are from the bolts holding the element in. The ones I am having made will not have holes in them, unless you want me to tap one in for ya where ever you want.
It will make a good boost connection without having to tap into your stock pieces.
I am interested in this piece also. Would it make a good location to mount three water meth nozzles?
Im thinking about putting a 3rd m6 nozzel somewhere in the plate..has me thinking...
When i installed my labonte nozzels, i did them 90* of each other, so on this application it could be placed on the lower left side and one on the upper middle/right.
Last edited:
I am not sure about mounting them that close thats why it is still in the box and also am undecided about wanting it on my truck. If anyone knows about the effects of mounting the nozzles that close please chim in:hello:
One more pic.
Bolt is where a good boost tap can be made. Again the ones I am making can come with or without the hole or holes.
Bolt is where a good boost tap can be made. Again the ones I am making can come with or without the hole or holes.
I thought I would have had info on friday but still nothing. I;ll call Monday and should have an Idea of cost and time.