98mph, no further? :(

JoshH

Daggum farm truck
Staff member
Vendor/Sponsor
Feb 14, 2007
13,735
804
113
Texas!!!
I will neither confirm nor deny how fast I have or haven't driven in my truck.
 

DAVe3283

Heavy & Slow
Sep 3, 2009
3,729
297
83
Boise, ID, USA
Finding tires that have a decent weight rating AND a decent speed rating is a pain. I special ordered my last set of BFGoodrich All Terrains, but even then, they are only good to 115 (officially...).
I will neither confirm nor deny how fast I have or haven't driven in my truck.
I can neither confirm nor deny that my big-ass crew cab will do north of 130 on the stock motor with a basic 425HP tune. :baby:

And I can confirm that I have been way to chicken to find out what it will do with the new turbo :eek::eek:
 
Last edited:

JoshH

Daggum farm truck
Staff member
Vendor/Sponsor
Feb 14, 2007
13,735
804
113
Texas!!!
Josh
You can not confirm or deny without posting a speed.

The speedometer only goes up to 120, but if anyone wants to do the math, I have seen 3700 RPM in 6th gear with 285/70-17 tires.
 

DAVe3283

Heavy & Slow
Sep 3, 2009
3,729
297
83
Boise, ID, USA
The speedometer only goes up to 120, but if anyone wants to do the math, I have seen 3700 RPM in 6th gear with 285/70-17 tires.
The math says 158 MPH :eek:

Edit: You didn't take a log? One of the abuse runs on the stock engine/transmission:

You can see it slip a bit in 5th as I try to roll back into power. Sorry Mike. If my trans was a mess inside when you built it, this was part of the reason :spit:
 
Last edited:

JoshH

Daggum farm truck
Staff member
Vendor/Sponsor
Feb 14, 2007
13,735
804
113
Texas!!!
The math says 158 MPH :eek:

Edit: You didn't take a log?
It wasn't something I had planned on doing, and after the fact, it didn't seem like such a good idea to do it again. That was on a stock motor with a set of MPI twins. To say the EGTs were a little hot would be an understatement. My EGT gauge was pegged for quite a while on that one.
 

Ray A.

New member
Apr 7, 2014
2
0
0
Anybody have any idea what might have happened, I put a new cold air box on my truck and it takes forever for it to get to power, then is put an edge evolution in and it still happens, once it warms up it gets back to normal but there is no bottom end power! Any Ideas?


Sent from my iPad using Tapatalk
 

bluessmax

Tabasco Injected!
Nov 4, 2010
1,143
6
38
Lake Charles, la
Anybody have any idea what might have happened, I put a new cold air box on my truck and it takes forever for it to get to power, then is put an edge evolution in and it still happens, once it warms up it gets back to normal but there is no bottom end power! Any Ideas?


Sent from my iPad using Tapatalk


Get with your tuner, your MAF needs to be rescaled!