Want to try one Jason? I did.
Any results to share mike? before I undertake it, I was told the truck won't move by a couple others.
P.S I will be in Inglewood tonight should I come visit?
09 tcm question
- Thread starter FarmDiesel22
- Start date
Any results to share mike? before I undertake it, I was told the truck won't move by a couple others.
P.S I will be in Inglewood tonight should I come visit?
You won't find me in Inglewood. Try Disneyland.
Haha okay, any good restaurants near the airport coming down to see a machine in to La Habra. Down tonight home thursday.
First trip to Cali
Any info on that TCM swap?
could it that its a 09 but does not have traction control or stabil trac?nope not yet better check
Should have a A50 in it and no to the tuning unless for some reason a few early 09's had A40's in them but I really doubt it.
It's just a max effort tune for stock turbo. Yeah it's only when in 4 lo. It defuels bad on shifts and if you don't wait to get into the throttle until you get in 3rd gear it will defuel and you will bounce hard. I learned the hard way and launched my front end in the air about mid track
Home from Cali, nice area spent most of the time at hermosa beach, and drove down to long beach. The machine I checked out was infact in fullerton.
And you didn't stop by to say hello?
I didn't have a ride I was stuck with the machinery dealer on a schedule
I wanted to but he was a bit of a dink.
I had this same issue...
does your pull go something like this...?
[YOUTUBE]GozYpGTkRg4[/YOUTUBE]
If so, Its not in the TCM....
Yeah. The second to third shift defuels bad and bounces. What is the problem then if it's not being able to tune the tcm??????
Who does your tuning? They should be able to fix it easy.
I found out my issue in the ECM, and was able to get it right. I built that tune in that vid sitting at the sled pull while my truck was being loaded with sand bags and totally overlooked it. I got that gnarly defuel in 4lo. There are tables you change in 2wd, but there is an exact table that it uses instead, in 4lo, look thru your tune closely, you will see it. Make the 4lo table the same as your 2wd table....
EDIT: I just saw your sig. Talk to Nick, he knows how to fix this Im sure. He might have a different way depending on how your tune is setup..
I found out my issue in the ECM, and was able to get it right. I built that tune in that vid sitting at the sled pull while my truck was being loaded with sand bags and totally overlooked it. I got that gnarly defuel in 4lo. There are tables you change in 2wd, but there is an exact table that it uses instead, in 4lo, look thru your tune closely, you will see it. Make the 4lo table the same as your 2wd table....
EDIT: I just saw your sig. Talk to Nick, he knows how to fix this Im sure. He might have a different way depending on how your tune is setup..
Ok today put dads truck TCM in my 10. His is an 08 with A40. Truck does not move with his tcm installed in my 2010 with a50.
