Search results

Search the forum Search Articles
  1. cobb

    Gear ratio ?

    With 33's go 4.56. I'm taking 4.56 out right now. If your interested pm me.
  2. cobb

    Gear ratio ?

    With 4.56 and 35's I was always around 3700 -3900 rpm in fourth.
  3. cobb

    2.5 class allow aftermarket headers??

    Usually it says must exit in an upward position behind the cab.
  4. cobb

    What modded cp3 for 100% injectors?

    I had a 10mm energy with 45 overs in my lbz and ran it out of fuel around 700 hp with a 68 mm turbo from Dannville. I have 12mm with 100 overs now and a 2.5 Danville charger. I'm around 750 hp and my rail pressure don't drop what so ever.
  5. cobb

    dhd alli locoker

    I know Tony had a lot of trial and error, so good luck.
  6. cobb

    Billet yoke daily driver??

    Just put a steel driveshaft and a billet 1480 yoke from allseasons on my truck and it drives fine with no vibration at all. Even at high speeds.:D
  7. cobb

    Heated CLOTH seats??

    Our Chevrolet Traverse came with heated cloth seats and love them.
  8. cobb

    Replacement Axles

    I busted three axles this year and now tony hooked me up with his 38 spline axles and a grizzly locker. Have to do a little modifying to the locker, but so far works great.
  9. cobb

    Industrial injection

    I purchased a 42% over and it flowed worse than the stock pump. It felt just like getting kicked in the nuts, but I called them and they sent me a 85% over plus I owed them the extra cost of the pump. I really didn't like pulling my cp3 out twice but at least they helped me out. I actually...
  10. cobb

    LBZ: cp3 gear help

    Make sure you torque it down to the right specs. I cracked mine putting it back on.
  11. cobb

    All Season Hummer Rims

    I have them on in my avatar.
  12. cobb

    Best Single CP3

    I went with an II 85% over because I wanted to look stock without drawing too much attention. I've had it on two years now and has worked fine as a dd, it held good pressure till I started wandering over 650 hp. I'll be adding a dual fueler this winter!
  13. cobb

    Sheid 2011 Pull Video's

    Tony said that the top four were all within a foot.
  14. cobb

    Placed 1st place at the Monroe County Fair

    Shiawasse county fair has a truck and tractor pull today at 3:00 for anyone looking.
  15. cobb

    EGR delete kits for LBZ/LMM coming soon

    I knew I should have kept my lly with less crap in the way.
  16. cobb

    EGR delete kits for LBZ/LMM coming soon

    Tony has several pictures that are being posted on his website for for instructions. I'm not quite sure if they are up yet, but I'm sure it will be soon.
  17. cobb

    EGR delete kits for LBZ/LMM coming soon

    After work last night I went up to all seasons and put on the high flow egr delete. With the help of Tony and his variety of tools it really wasn't difficult to put on. I already had the egr delete tube on and had the other crap out of the way. Only drove it home and a little this morning...
  18. cobb

    ATS atomizer

    Lift pump and shim your frpv (feul rail pressure valve). Or you can get the race valve and just plug it off.
  19. cobb

    "stock appearing" at fair pulls

    I had the 4094r and when it spooled up you could definately tell it was not stock. I really liked the turbo but as I got hooked into sled pullin and wanted to pull more I was kinda screwed by the size. I love my 2.6 that I have now and it looks stock but you sure can't hide the whistle.
  20. cobb

    "stock appearing" at fair pulls

    I got by with it until some other trucks that were close to me got pissed. They started wondering why I was putting 30 ft on them and before I knew it I had to pull in the 2.8. Daily driving was ok once I got use to the spool up. I have the 6 speed ali so when I towed, I ran in 5th and it was...
Top Bottom