Search results

Search the forum Search Articles
  1. M

    Ppe cupless heads injector install

    OK sounds good, thanks guys. Would never consider myself a mechanic but I've always felt something like that would sit flush.
  2. M

    Ppe cupless heads injector install

    I suppose as long as that hold down doesn't unthread it shouldn't allow the injector to come up any
  3. M

    Ppe cupless heads injector install

    Not sure what they look like in the stock head. I'm about to get on a plane right now. Stock head also has cups. You're saying the gap in that picture should be fine then? I feel like they're supposed to sit flush but I have no clue. Been a long time since I did the injectors previously and...
  4. M

    Ppe cupless heads injector install

    Has anyone had an issue installing the injectors in the new style cupless heads from ppe? Had to pretty forcefully push the injector down and it doesn't sit flush with the head. Seems the gap is about the width of the copper washer. Not sure if I'm supposed to use the washers with these newer...
  5. M

    Power steering issue. Need help asap

    Sorry if this is a repost but i dont have time to search the forums for weeks. Replaced my inner/outer tie rods, pitman arm, idler arm and bracket. All moog replacements. Had to pull the steering box to get the pitman arm off after hours of trying not to remove it. After reinstalling the box...
  6. M

    Fuel filter housing leak 04 lb7

    Any reason other than the gauges being garbage for them breaking? Sent from my SM-G900P using Tapatalk
  7. M

    Fuel filter housing leak 04 lb7

    Do you have a fuel pressure gauge installed? Another question, ive broke 2 fuel pressure gauges that were hooked into the fuel filter delete bowl. Fass said its supposed to be from 8-10 psi which at idle it is but after a few passes at the track the gauge leaks out the front of it Sent from...
  8. M

    Fuel filter housing leak 04 lb7

    And since i have the fass pump i dont have to worry about priming it after the housing is bypassed correct? Sent from my SM-G900P using Tapatalk
  9. M

    Fuel filter housing leak 04 lb7

    Oh ok thanks man Sent from my SM-G900P using Tapatalk
  10. M

    Fuel filter housing leak 04 lb7

    I thought those two hoses are one is input to ficm and the other is a return to the housing for when its getting too much fuel to the ficm? Wouldnt it send too much to the cp3 pump if you connet the two together? Sent from my SM-G900P using Tapatalk
  11. M

    Fuel filter housing leak 04 lb7

    Back when i replaced the injectors i also rebuilt the fuel filter housing along with it. I never noticed a leak until i installed a fass 95gph lift pump. Im about 90 % sure its coming from the top of the housing under where the 3 screws hold the primer down. I opened it up, noticed the oring...
Top Bottom