Search results

Search the forum Search Articles
  1. 05' Ditry Duramax

    Jackson Memorial!!

    By "DONATIONS" do they really mean........ "TAXES"??:rolleyes:
  2. 05' Ditry Duramax

    The New Camaro is out there.

    Even an Escalade has 400 HP nowdays......
  3. 05' Ditry Duramax

    Clamp Pliers

    I've seen them at Napa I can't find a good link on their site.
  4. 05' Ditry Duramax

    37 or 35....

    twice the tire though
  5. 05' Ditry Duramax

    37 or 35....

    You bring up a good point. BUT, the with 35's you should go with a 4:56. The 4:11 isn't worth the money IMO. 4:88's will be too deep for 37's. I was running that for awhile untill I got the 39.5's. It was great around town (even with stock tuning) but I couldn't run faster than 60 MPH on the...
  6. 05' Ditry Duramax

    37 or 35....

    I would put them on then give the bars a turn or 2 if they aren't turned up now. You'll have to go get it aligned too. I had a customer that had to put a 3" body lift on his truck to clear 38's with a RCD kit. They still rubbed. SO.........who knows really.
  7. 05' Ditry Duramax

    year one?

    It was OK at best. Wasn't really funny.
  8. 05' Ditry Duramax

    37 or 35....

    Having never owned the Mud Grappler but have been a few trucks with them.....I would not buy them. That is a very rough and horrible sounding tire. Sounds like a RC airplane on the highway. I can't take the noise. I'd go with the M16 even though they haven't been out for very long. Interco...
  9. 05' Ditry Duramax

    Hangover

    Really funny movie. I wanna go see it again!!!:rofl:
  10. 05' Ditry Duramax

    LLY ECM pins

    I'm kinda spoiled when it comes to dealerships. I go to the one I used to work at, walk in and start digging. It was worth a shot though. I'd try and call someone who makes them and see if they can send you one or get you an updated part number like suggested already.
  11. 05' Ditry Duramax

    Help: Debadging

    ooooo, yeah I bet it did. I went to a Sherman Williams auto paint store and asked what I should use. He told me the 3M adheasive remover stuff. Worked great.
  12. 05' Ditry Duramax

    would like to hear some 1/4 times of lifted trucks

    I don't see gears listed in youe sig. I would assume your running the 3:73's with those tires?
  13. 05' Ditry Duramax

    LLY ECM pins

    just start going thru the trays. That's what I had to do. It sucks but I found them. Do you have 1 to compare with?
  14. 05' Ditry Duramax

    Help: Paint peeling

    I think he's talking about the 2 pieces that are attached to the grill. You can't pull the off seperate. I'd pull the grill and paint the intire thing. I wanna do that with my truck. I don't like the cheesy plastic chrome on there.
  15. 05' Ditry Duramax

    Why is my driveshaft...

    Mines a CCSB 4X4 and I have the aluminum drive shaft. I've always wanted to polish it but we get a lot of rain up here in western Washington so I would never drive it. I don't think it would go too well with the blacked out look I kinda have going on either.
  16. 05' Ditry Duramax

    hard steering

    Mine too. Never had to hang on the wheel to make it turn. Even when I had a wide set of 37's on it. There's something going on with the system. I would also sugest NOT putting that much effort into turning the wheel. Unless you like to buy steering parts. You should let the truck start to roll...
  17. 05' Ditry Duramax

    Help: Debadging

    I forgot the earaser wheel deal. Saves the thumbs
  18. 05' Ditry Duramax

    Help: Debadging

    if you put the fishing line under the badge and not on the paint, it's not going to burn it. It's a lot easyier than masking and covering everything up for 2 minutes worth of work. I broke a badge with paint scraper:hug:
  19. 05' Ditry Duramax

    LLY ECM pins

    part # 15356827 Got that number from Kat in this thread http://www.duramaxdiesels.com/forum/showthread.php?t=14409&highlight=dsp5+LLy
  20. 05' Ditry Duramax

    Help: Debadging

    Try fishing line The 3M adheasive remover works realy realy well. Might try that if that's not what your using already.
Top Bottom