Search results

Search the forum Search Articles
  1. ryan415

    zf shifting

    :thumb:
  2. ryan415

    Help: Steering wheel controls stopped working...

    Did it happen after you replaced the cluster? Cluster will need to be programmed in that case.
  3. ryan415

    Question: Rear Wheel Spacers... Who is running them?!? Yes or No?!?

    I'm glad to hear the 1/4" made them even:thumb: I thought about doing the same thing, but I'm trying to save what little paint is left on my truck lol. It gets hammered with rocks from the tires
  4. ryan415

    Question: Rear Wheel Spacers... Who is running them?!? Yes or No?!?

    Yes they're just standard 6061 t6 billet. I bought them on ebay also. Ran them for about a month with zero issues. I just didn't like how they were wider than the fronts. My buddy took a 1/8" off either side of them and I cut the studs down. They should match the front perfect now... hopefully lol
  5. ryan415

    Question: Rear Wheel Spacers... Who is running them?!? Yes or No?!?

    Here's a picture of the spacers I had machined Troy. Trimmed the wheel studs too. I'm hoping to put them on this weekend and I'll get some pictures.
  6. ryan415

    Little Girls Night Out

    Great picture! :thumb:
  7. ryan415

    Twins, Triples, and other parts we are working on now!

    So nice and clean:thumb: I can only imagine what your single kits will look like
  8. ryan415

    My new setup

    Looks great and the stance is perfect:thumb:
  9. ryan415

    Question: What's the best additive to run in diesel

    I run Power Service Diesel Kleen as it's the easiest to get in my area and works great. But I would like to try Stanadyne or Optilube as I have heard nothing but good things about them.
  10. ryan415

    Suncoast high energy c3 intabulator friction

    Those look awesome:thumb: So many options and new parts coming out, I need to just bite the bullet and get my trans done lol
  11. ryan415

    How to tell the difference.

    A 06 lly will still have the old badge. They only started the new badges on lbz's
  12. ryan415

    BD turbine diverter valve

    Here's the one from SDP
  13. ryan415

    BD turbine diverter valve

    At the beginning of the video he just mentions it and drive a bit. He talked more about the mixture control than the valve. I googled it and looks like the bd but a little smaller. Also saw a post on Facebook yesterday about Scott at sdp testing the bd valve on they're new big single charger kit
  14. ryan415

    ac problem

    There is a 40a fuse in the under hood fuse block which is used for the high speed only I believe. It that is blown you will most likely need a new blown motor as it is drawing excessive current. If the fuse is good unplug your blower resistor and see if the connector is melted and any of the...
  15. ryan415

    BD turbine diverter valve

    No, I was talking about the quick spool valve. I believe it works similar to the BD one you are looking at.
  16. ryan415

    BD turbine diverter valve

    Wonder if its similar to this. http://m.youtube.com/watch?v=wU6ScWaF504
  17. ryan415

    LBZ: Programming Injector Flow Rate?

    The Bosch remans I put in my truck had the flow rates echted in the side of the injector body. But you will also get the sticker like Joe said.
  18. ryan415

    LBZ: P268a

    You can try having it programmed and see if you can get the flow rates back. Otherwise you'll probably end up replacing it and the only way to get the flow rates is off of the injector bodies unfortunately. Or it may just be a issue with the solis, try programming them with a tech2 if possible...
  19. ryan415

    LBZ: P268a

    P160c-engine calibration not programmed-gpcm. Basically the same as the other code but is saying that the flow rates are missing from the gpcm
  20. ryan415

    LBZ: P268a

    No can't say I have seen that. Not sure if a failed gpcm would cause that, I've replaced them before but for different concerns. Only other way to get the flow rates is from each injector I believe.
Top Bottom