Search results

Search the forum Search Articles
  1. knagel

    log file jumping all over the place

    Is it something I need to try to use in v8.3? If it is, then I am not sure how to link to log and tune file together. Can someone help?
  2. knagel

    log file jumping all over the place

    Ok... its been a while again. I just logged an LBZ that I tuned. The log is jumping all over the place. Like low and high spikes in all categories. Can't even look at in the tune file. Any ideas on why it is doing this? I took 3 log files and all did the same thing. Truck runs fine but...
  3. knagel

    LBZ os12606128 to be used on os12632483 truck

    made a script from my 6128 tune i wanted to use and applied it to the 2483 tune and it worked as it should. Thanks for all the input! Im guessing a full flash would have did the same thing but I'm thinking scripting was better. The 2483 is a 07 classic OS and the 6128 is a 06 OS and here we...
  4. knagel

    LBZ os12606128 to be used on os12632483 truck

    Don’t really want to change or use the 6128os if I don’t have to. I just want to use my tuning from the 6128os in the 07 classic 2483os. Is this we’re a script would work since it’s LBZ to LBZ but I can’t open both to compair?
  5. knagel

    LBZ os12606128 to be used on os12632483 truck

    Both are LBZ. the 6128 is an 06 OS and the 2483 is and 07 classic OS. How do I make the 6128 os tune work on the 2483 os? Cut n Paste? Or can I just full flash the 2483 to the 6128 os? on a side note, its been QUITE a while since I have been here and I though Pat had more race files on here...
  6. knagel

    LB7 to LB7 swap

    Thanks for the info! I might have found a rust free 02 with bad cups i can get fairly cheap so I may go that route.
  7. knagel

    LB7 to LB7 swap

    Thanks a bunch!! hopefully this is useful to others too! Have a great day!
  8. knagel

    LB7 to LB7 swap

    So no internal or external differences in the 01/02 to 03/04 engine. Just use everything (harnesses and sensors) off the 04 and put the 02 engine in the 04 correct?
  9. knagel

    LB7 to LB7 swap

    That's what I was wondering. Basically take all the engine harness and sensors off the 04 and put them on the 02 and should be good to go? Any info you guys can put up is greatly appreciated! I have been told to just stay with an 02 body because it will be easier. But there has to be a...
  10. knagel

    LB7 to LB7 swap

    I tried searching but didn't really find the answer i was looking for. I am in Iowa and have a great running 2002 LB7 but the truck needs to be retired due to rust. I have been searching down south for used LB7 trucks and there doesn't seem to be very many 2001/02 trucks. There are more 03-04...
    • knagel
    • Thread
    • Replies: 10
    • Forum: LB7
  11. knagel

    LBZ: P0405 EGR code won't go away

    It doesn't seem to derate or effect drivability. Just wanted it not there when scanned because the customer has a handheld scan tool and he didn't want the glow plug replaced so there is a check engine light on still. So I'm sure he will check it again sometime...... Wish when you shut off...
  12. knagel

    LBZ: P0405 EGR code won't go away

    I deleted the EGR on a 07 LBZ. Left stock intake grid heater on, just blocked each end of the cooler and EGR and removed. I turned off (X: Not Reported, No MIL) on everything to do with the EGR. Code P0405 still shows up when scanned but no check engine light. It does not seem to derate...
  13. knagel

    Tuning

    If I am reading that correctly it appears that the 4 cal Duramax that is in the Colorados has an E98 ECM and that you can download your stock tune just like you could in the pre2010 regular Duramax trucks. And then manipulate the files how you see fit and then reflash the ECM with that file...
  14. knagel

    Tuning

    My question is: Can these 4 cyl duramax be tuned with EFI live? If so, is it the same hoops you have to jump through with the LML tuning that you can not extract your stock tune and therefore have to find someone that has the ability to do that? If tuned, will the stock automatic tranny...
  15. knagel

    6.0 gas problem tuning

    I posted this in the gas section here and it was suggested that I move it to here. Kevin
  16. knagel

    6.0 gas problem tuning

    Warning: this is going to be a long one..... OK,... so I was asked by a local shop to tune a 6.0 in an 06 1500 Gmax. They changed the cam and put a fixed geometry cam in. All they wanted me to do was turn off active fuel management and shut off the cam phasers and change the tires size so the...
  17. knagel

    hard 6.0 tuning question

    full flash
  18. knagel

    hard 6.0 tuning question

    nope, not yet. thought I would see if there were any guys on here that have messed with gas first. that's my next step though kevin
  19. knagel

    hard 6.0 tuning question

    This fried even with the factory calibrations. I was almost like EFIlive missed something when either taking the original tune out or putting it back in and it threw stuff out of whack so bad that it either fried the ECM or made it so the tune was incorrect some how?
  20. knagel

    hard 6.0 tuning question

    Warning: this is going to be a long one..... OK,... so I was asked by a local shop to tune a 6.0 in an 06 1500 Gmax. They changed the cam and put a fixed geometry cam in. All they wanted me to do was turn off active fuel management and shut off the cam phasers and change the tires size so...
Top Bottom