Search results

  1. pornstar dancin

    New Wagler intake!!!

    For the guys with it Installed already how many change are required for the wiring harness and fuel lines
  2. pornstar dancin

    LB7: About to tackle my injectors, any pointers?

    You will have to have the truck running. The cp3 is what gives you your high pressures but be careful.
  3. pornstar dancin

    LB7: Need help identifying cover

    Can someone tell me the purpose of having rear adapter housing and cover.
  4. pornstar dancin

    LB7: Need help identifying cover

    Hoping one of you guys can help me. I have an 02 lb7 with a coolant leak. It's coming from the rectangle cover directly above the starter on the back of the block on the passenger side. Hoping someone can tell me name of this gasket and what the cover even is.
  5. pornstar dancin

    fitting T6 turbo

    Can get a pic if you want
  6. pornstar dancin

    fitting T6 turbo

    What I did rich was build a 3" pedestal spacer that is at a 45° forward so it lifts the turbo up and forward so you clear the sensor and it gets you away from the firewall. I just had to notch my cowl a little to fit. Just an idea and you can make it out of steel laying around.
  7. pornstar dancin

    Info: Allison trans in 2.6 truck

    Did the new converter allow you to hold the truck back longer. I have a 3000 stall and usually get 3300 before I leave the line
  8. pornstar dancin

    Info: Allison trans in 2.6 truck

    It will definately take some time in the seat and some finesse to get your setup to spool at the line. But converter or something else might not be helping
  9. pornstar dancin

    Info: Allison trans in 2.6 truck

    What converter are you running? Is it wanting to push thru the brakes at 1500? I had a similar problem last yr with a converter that was suppose to be 3000 stall but truck was pushing thru at 2300 so I sent it back got it restalled and has been great ever since. I think the company just had it...
  10. pornstar dancin

    Recaps

    Look up treadwright I have ran them before on a heavy truck with no problems. I wouldn't trust them towing or anything like that but not bad for the money
  11. pornstar dancin

    Lb7 hard fuel lines

    Thanks for all the options guys. I have some CLR and try that first
  12. pornstar dancin

    Lb7 hard fuel lines

    I thought about CLR and carb cleaner and I don't have access to blaster or ultra sonic.
  13. pornstar dancin

    Lb7 hard fuel lines

    I'm doing a friends injectors and upon pulling fuel lines the hard lines are full of rust and debris. Friend doesn't want to pony up the cash for new lines but if I install they on new injectors I think its going to ruin them right away. So looking for a few options to possibly clean the lines...
  14. pornstar dancin

    Duramaxzak 2.6 pulling truck build

    I eliminated my cooler since the lines were leaking. I run a deep pan and even with back to back pulls I have never had problems with getting hot. As far as electrical on my truck I prefer to switch the positive just to eliminate a direct short from happening at the pumps or fans.
  15. pornstar dancin

    mounting fuel tank out front

    I just mounted mine in my bed because it was easy to install cell pump and lines. Figured it didn't weigh that much to worry about installing out front.
  16. pornstar dancin

    mounting fuel tank out front

    Why you want your fuel up front? Running it through the ice to cool?
  17. pornstar dancin

    Duramaxzak 2.6 pulling truck build

    It doesn't look like you were too tight on room fitting both coolers up front and you have your piping done but to give you more room in the front you could have welded both coolers together. Looks good and your truck is very similar in build to mine!
  18. pornstar dancin

    Considering 05' gmc 2500hd 267k $9500

    No ext cab and manual locks/window
  19. pornstar dancin

    Considering 05' gmc 2500hd 267k $9500

    Those prices seem high. Here I am trying to sell an 05 withdraw 160000 and I can't even get 9 for it
  20. pornstar dancin

    2007.5 lmm egr cooler?

    Banders if you are looking for an egr cooler I have one I took off my lmm that would sell cheap