Search results

Search the forum Search Articles
  1. zf>allison

    Piecing together an s400 kit

    Order a vband for the borg exhaust housing, I ordered a 4 inch 90° bend welded the vband to it and basically added a straight 4 inch pipe that but I didn't have a dipstick to clear because mines a manual trans. Then tie it into the exhaust with another vband. I have a thread about my build...
  2. zf>allison

    Piecing together an s400 kit

    Yes if your running a vband compressor cover you will need a clamp and a vband for the hot side pipe. Also I did a 4 inch down pipe and massaged it in. That required cutting the reducer off of the inlet of my 4 inch exhaust and I did a vband connection there as well. You will need a maf sensor...
  3. zf>allison

    Piecing together an s400 kit

    The lb7 style bridge works well with a single s400. I built a kit super cheap but I made a pedastal and intake and downpipe and modified the top of the hot side factory ic pipe, lb7 has a 3 inch boost tubes they just neck down. I just cut the top off and welded a 3 inch prebent and bead rolled...
  4. zf>allison

    Who else is going to UCC?

    We're heading out in a few to leave.
  5. zf>allison

    Weight Lifting/Body Building/Strong Man/Training thread

    My whole neck is sore from straining on those deads lifts.:violin:
  6. zf>allison

    Who else is going to UCC?

    I'll be riding up with the st louis crew.
  7. zf>allison

    Weight Lifting/Body Building/Strong Man/Training thread

    I don't wanna know mine lol
  8. zf>allison

    Weight Lifting/Body Building/Strong Man/Training thread

    I gotta get the video, I don't k ow what happened but it was just one of those days where everything just felt good and the weights felt light. I did way less reps pyramiding up is why I think I did so well. Conventional Deads 225 x 10 warmup 315 x 5 405 x 5 455 x 5 :D was shooting to...
  9. zf>allison

    Weight Lifting/Body Building/Strong Man/Training thread

    Did some higher reps on flat and inclined bench than usual. Tore up triceps, I swear I'm losing weight but the scale doesn't think so. Was 248.8 still today.
  10. zf>allison

    No traction

    That's 2 leaves with caltracs lol and now spring clamps. But nothing beats pedal control for traction.
  11. zf>allison

    No traction

    I run low tire pressure in that back all the time but wasn't driving mine everyday. Welded rear end helped a bunch. I'm also on 2 leaves and I think that softness helped some.
  12. zf>allison

    Busted Danville pinned pump

    If that pin sheared I bet a piece would still be pressed in one of the holes. Looks like it fell out to me.
  13. zf>allison

    LLY: This looks fun

    I know a guy with like 5 or 6 heli coils in his duramax block and he has had no issues that I have heard. He hand tightened the studs without cleaning the threads and didn't get them all the way down and torqued them down and took out alot ot threads lol.
  14. zf>allison

    Weight Lifting/Body Building/Strong Man/Training thread

    I'm like 245, I need to drop like 15 to 20 pounds still lol. Been tearing up some tuna melts.
  15. zf>allison

    LLY: This looks fun

    Ok i read my old thread, I broke 2 and got one with vise grips and another with the welded nut approache, I'm a firm believer in welding a large washer to the stud then welding a larger nut to that. I need to make a video one day on this. You can get a nice hot bead inside a bigger nut. And you...
  16. zf>allison

    LLY: This looks fun

    I broke like 3 on the crew cab I believe. Never needed a heli coil I had one that was just above flush to and welding nuts to them and hitting them with some Kroil for like 3 days and heated them up and they came right out.
  17. zf>allison

    Axle Dump

    I may not have had alot of drone do to the 4 inch. I have never had a 5 inch exhaust. I honestly like the sound of 4 better.
  18. zf>allison

    Axle Dump

    That's alot cleaner looking underneath than mine lol. Looks good, have you drove it much? What do you think?
  19. zf>allison

    Axle Dump

    Yeah mine was 4" and it must have been pointed just right. Did get the tailgate black after a while.
  20. zf>allison

    Axle Dump

    I think I added this tip later so it wasn't black anymore. Excuse my rust. I loved this setup, it fit when I had the spare to.
Top Bottom