Search results

  1. Harbin_22

    Service stabiltrac and park assist off

    Get a scanner that can pull the codes. Might have something g else going on or just needs the codes cleared.
  2. Harbin_22

    Service stabiltrac and park assist off

    Did you try to retrieve codes? Could be from having the truck on without sensors hooked up or something easy.
  3. Harbin_22

    Modifyed Fuel Pressure Regulator

    [email protected] is his email. In the bottom of his sigs on every post
  4. Harbin_22

    Modifyed Fuel Pressure Regulator

    I can assure you that has nothing to do with being able to talk to Mark lol.
  5. Harbin_22

    Fuel Balance Rates

    What are you checking rates with? Not sure if EFI ever straightened out the LLY rates being the wrong injector location.
  6. Harbin_22

    Quick question 09 3500 lmm

    Sometimes they will run for a little while without a tune, but sooner or later, sooner, they will go into limp mode
  7. Harbin_22

    Recover and Rebuild Driver Seat - LMM

    http://www.gmpartsdirect.com/auto-parts/2009/chevrolet/silverado-2500-hd/lt-trim/6-6l-v8-diesel-engine/body-cat/front-seat-components-scat If you really want it to match, buy the OEM stuff. May not get it from gmpartsdirect, as they have been getting a bad rep for slow shipping, but they have...
  8. Harbin_22

    Fastest Single Turbo Duramax

    Was actually amazing that it wen 6.60 with only 102ish mph. He is getting it back together now, if it ever makes a clean pass, it will be pretty quick
  9. Harbin_22

    Lowest Safe air pressures for drag racing on Drag Radials

    I thought the lower a ladder setup was giving more leverage on the front of the chassis. I'm no suspension guru either so take it with a grain.
  10. Harbin_22

    Lowest Safe air pressures for drag racing on Drag Radials

    1.5x weren't uncommon. Funk has been lots of 1.4x with similar pressure
  11. Harbin_22

    Lowest Safe air pressures for drag racing on Drag Radials

    I run 28-30 front and 20-22 rear on the 30x14. Someone correct me if I'm wrong, but moving your bars down would be putting more lift to the front of the truck.
  12. Harbin_22

    Fastest Single Turbo Duramax

    Honestly not sure now. Lower 6k area. This was after the duraflite swap and it was skipping gears and hitting limiter on those passes lol. Thing is a beast on the first part of the track, new trans setup and still cut 1.4x 60'
  13. Harbin_22

    New Product!!! GM Duramax Deep oil pan

    My LMM oil pressure gauge is way of from what EFI log shows. My gauge barely ever goes above 35ish and the log will show 60.
  14. Harbin_22

    The Juggernaut shop truck build

    Looking good little buddy! Can't wait to see it completed and hauling ass down the track
  15. Harbin_22

    Tuning Out Boost Surge

    Definitely talk to mark, but you have to mess with minimum and Maximum vane tables
  16. Harbin_22

    Fastest Single Turbo Duramax

    Funk went 6.60 in the 1/8 on fuel. Single 75
  17. Harbin_22

    Exhaust question

    Get three turbos and 5" is pretty quiet. If I put a muffler on, you wouldn't be able to hear it