Search results

Search the forum Search Articles
  1. MACKIN

    where is the oil pressure sending unit?

    Get it good and hot or up to full operating temp range I should say and then check your mechanical gauge against your cluster gauge. As mentioned make sure your not making oil by having a injector issue. How many miles on your truck anyway? Maybe I missed it
  2. MACKIN

    Hub centric rings?

    Hub centric IMO is far better then lug ! Or should say more precise. Here's a FYI on my dually rear the inside tire was HUB centric and the out bound was lug centric ONLY! So now what cha got to say? :D
  3. MACKIN

    Hub centric rings?

    I believe it is this way because BOTH axles for the 2500 and 3500 are basically the same. The 3500 DUAL wheel trucks having a larger spring pack and the dually adapters. The 2500 are designed to be stud centering or lug nut and dual wheel trucks are hub centering! Make sense?
  4. MACKIN

    Hub centric rings?

    Correct from what I've seen! I didn't find that when I ran aftermarket wheels!
  5. MACKIN

    Hub centric rings?

    Acorn yes but I believe conical is the real term for what that style lug nut is.
  6. MACKIN

    Hub centric rings?

    Ahhh I see I'm so use to dually's which are hub centric with flat lug nuts. In 2001 they switched from lug nut centering to hub. Thanks for the info
  7. MACKIN

    Hub centric rings?

    What lug nuts are used on the 2500 HD. trucks flat or conical?
  8. MACKIN

    Motor break in question please help

    Thought so from their web site. I have a Jaspar engine in my CJ LIVE-RUN AND DYNAMOMETER TESTING Every JASPER complete diesel engine is tested. All running complete engines are live-run dynamometer tested under varying loads simulating in-the-vehicle operation. Units receive a pre-start and...
  9. MACKIN

    Motor break in question please help

    I thought all Jaspar engines were ran on a engine dyno if so they are broken in when you get it
  10. MACKIN

    Can you guess what these are?

    How long does it take?
  11. MACKIN

    Are all the tie rods the same from 01-13?

    I " think" up till 2010 ?
  12. MACKIN

    Hub centric rings?

    I always thought that IF they aren't hub centric then they were lug centric and you had to purchase conical (cone shaped) lug nuts. IMO I wouldn't use HUB centric lug nuts (flat) on a conical seat wheel! Nor would I just let the wheel rest on the studs!
  13. MACKIN

    Steering wheel control bulbs

    I'd disable the airbag when doing this mod be that's me. Be a VERY expensive mistake!
  14. MACKIN

    Anyone know of a Dillion Stormont??

    Where did you find the motor for sale and handle the transaction?
  15. MACKIN

    LBZ: Which tunner? Dustin(dieseladdiction) or tony??

    You know who has a wicked fast truck that tunes? Idaho Rob at ATP! Since were talking about fast trucks,Just saying. :D
  16. MACKIN

    Will a Kenndy Lift Pump Be Ok Sucking?

    Wish I seen this earlier! I had Kennedy's pumps. I pushed and pulled thru a Cat 2 Micron filter in the middle of the pumps with no issues!
  17. MACKIN

    C2 and C5 applied?

    I'm assuming it would be a real LOW ratio. In a five speed c5 is applied in first and reverse both low ratios. :confused:
  18. MACKIN

    tug a truck

    First off like it was said it proves nothing ! Stupid form of entertainment for drunk hillbilly's no offense to any drunk hillbilly's reading this! :woott: IMO, I diss agree to the most powerful truck wins! The heavier you are the better the lower the gear the better and TRACTION WINS! Once...
  19. MACKIN

    Can you guess what these are?

    Spent transmission fluid? :confused: :joker: :joker:
  20. MACKIN

    Got a job at Dodge!

    You don't know anything about them? :confused: Perfect you'll fit right in! :D J/K good luck with your new job!
Top Bottom