Search results

Search the forum Search Articles
  1. snowman22

    LML "Service Exhaust Fluid System" No DTC's after DPF Re-Install

    I don't remember it doing anything noticeable. It just ran the test and showed it completed on the screen. Once it completed successfully it no longer had the message on the dash. It seemed to be more of a system verification to allow the reset.
  2. snowman22

    LB7: 02 LB7 Audio Overhaul

    0ga is probably overkill, but can't hurt. I don't envy you trying to get it tucked away. If you still run a dual battery setup a capacitor isn't necessary, but would be a good idea if you have gone down to a single.
  3. snowman22

    LB7: 02 LB7 Audio Overhaul

    Don't ever mount to a box. I've seen way too many issues come up after amps get warm and then the vibrations cause intermittent issues with loose solder joints.
  4. snowman22

    LB7: 02 LB7 Audio Overhaul

    Just get the airspace right and at least put dynamat or some sound deadening directly behind all the speakers on the cab/doors. Dynamat, correct enclosures, properly tuned/delayed speakers don't get enough credit. The best equipment sounds awful if you ignore those aspects.
  5. snowman22

    Gale Banks reacts to Hoonigan 1000hp build

    Unless I missed something I don't seen any comment condoning what Banks did. So to jump on Kory for "backing him up" seems uncalled for. Regardless, the video was "accurate" information, delivered in a poor fashion. I think it's a grab at sensational titles that create views and their...
  6. snowman22

    Changing RV batteries

    bestcarts.net sells US Batteries and I've had good luck with them in my 5ver.
  7. snowman22

    Which Wheel Hubs?

    I put over 100k on Timkens on my LB7 and almost 20k so far on my LML with no issues. Amazon and were on my door in two days.
  8. snowman22

    LML ‘12 Suspension Components vs ‘16

    I know the Kryptonite UCAs I just installed said 11-18 on the box and fit my 15.5 perfect. Sent from my iPhone using Tapatalk
  9. snowman22

    Which Polymer Pistol?

    The 2.0 is awesome and a major improvement Over the original. I have the originals in 9 and 40, but until I can get my hands on the 2.0 in CA they will stay in my safe. 1911s are my favorite pistol, but require a lot of training to carry safely and be effective. Someone mentioned the manual...
  10. snowman22

    Which Polymer Pistol?

    I've actually only seen once case blown open and have seen a at least 3 fire out of battery. My other issue is if they are pressed against anything forcing it out of battery it will still fire, yikes...not likely but in a struggle it could cause an issue. I however shouldn't be used as a...
  11. snowman22

    Which Polymer Pistol?

    Anyone discounting CZ just hasn't had the seat time to shoot them. I only have a few 75's for different uses all with some cajun gun works parts for good measure. Haven't had too much time with the poly stuff since getting stuff into CA has been getting harder and harder. The only mainstream...
  12. snowman22

    Which Polymer Pistol?

    While I understand the argument, anything under a 5" barrel will have better expansion and penetration with +P because you won't actually see the the muzzle velocity you expect with a standard round. You can get Hornaday critical defense which seems to be designed for shorter barrels and is what...
  13. snowman22

    Which Polymer Pistol?

    These are great guns, but if you plan to use it in a self defense situation I would recommend getting a grip to hold down the palm safety. They aren't big enough to ensure a solid contact like a 1911 beaver tail and can cause a failure to fire condition if you don't have a great grip on it in...
  14. snowman22

    What are you paying for Diesel in your area?

    The economy is surely not in a great place, but I think the fast drop in price is demand. Not enough people driving so the supply is in a major surplus driving the price down. $2.69 in SoCal the other day.
  15. snowman22

    04 lb7 w/ cyl 4 bal rate 15

    I would post your compression for each cylinder, 270-320 is a big range and on the low side. What is the MAF, rail pressure, and fuel rate at idle? You sure you didn't leave a rag in the intake? (Might be asking from previous experience)
  16. snowman22

    Makita battery and charger mod

    They are Ion, not Lipo. Lipo batteries are a whole different level of fire risk.
  17. snowman22

    Question: Axle Block on 5th Wheel. Good or Bad Idea?

    This could be a good partial solution. I emailed them to see if it will change the ride height and if it will change the amount of spacing required between the tires. If it needs more clearance that would negate any height I could get from larger tires. Helping the ride quality would be nice...
  18. snowman22

    Question: Axle Block on 5th Wheel. Good or Bad Idea?

    It’s just a traditional tandem 3500lb setup that’s been flipped (the right way) Sent from my iPhone using Tapatalk
  19. snowman22

    Question: Axle Block on 5th Wheel. Good or Bad Idea?

    3 leafs in the pack. I quickly looked prior to writing this thread for a spring with more arch with a 25 1/4” eye to eye, but everything seems to be 3” only. Getting additional leafs would obviously increase the ride height by the thickness change in the leaf pack. They make a 6 leaf, but the...
  20. snowman22

    Question: Axle Block on 5th Wheel. Good or Bad Idea?

    The truck needs to go the other way! In all seriousness I can’t lower it because I already have high center issues when I go up in the hills to hike or ride moto. It would also put the truck in the overload springs unloaded. Sent from my iPhone using Tapatalk
Top Bottom