Search results

Search the forum Search Articles
  1. SoCalMike

    Turn signal staying lit up when headlights on

    My bulbs are not polarity sensitive but they are dual brightness. Meaning when the headlights are on the brake and turn signals are on but at a low light. When I turn on the signals or step on the brakes the will go to full brightness. That might be part of your problem not being a dual...
  2. SoCalMike

    Turn signal staying lit up when headlights on

    You should see my wire in up front. All hacked up trying to figure it out. Had to solder and heat shrink wrap all my cut wires from troubleshooting. The only way I got the 194 led bulbs to work was to wire in a resistor with the two wires of a 194 bulb..... If you get time, look at the front...
  3. SoCalMike

    Turn signal staying lit up when headlights on

    I didn't understand either but it works. Lol I have been running it for about a year with no problems.
  4. SoCalMike

    Turn signal staying lit up when headlights on

    The only feed back I got was with the lights on the dash turn signals we're lightly glowing and my tow mirrors turn signals we're lightly glowing. Also had issues with the 194s not acting right with out the resistor.
  5. SoCalMike

    Turn signal staying lit up when headlights on

    No. I don't think I did.
  6. SoCalMike

    Turn signal staying lit up when headlights on

    Yes sir. 50watt 6ohm resistor.
  7. SoCalMike

    Turn signal staying lit up when headlights on

    Go try what I said and see what happens.
  8. SoCalMike

    Turn signal staying lit up when headlights on

    Your recon aftermarket tail lights have built in resistors so people can replace the whole housing and not have problems. You are running a different setup so your fine with what your running. All my tail lights and head lights are stock. I just changed out the incandescent bulbs and am...
  9. SoCalMike

    Turn signal staying lit up when headlights on

    The resistors will get rid to the backfeed. I have the novita flasher. I run these in amber for the front turns and red for the brake and rear turns. I have tried a lot of bulbs and these are the best so far. Alla Lighting 1000 Lumens 3030 36-SMD Extremely Super Bright Amber Yellow 3057...
  10. SoCalMike

    Turn signal staying lit up when headlights on

    It's easier to mount the resistors in the rear versus doing it in the front. And if for whatever reason you decide to do something different, you can replace the rear light wire harnesses. The front is harder to replace the wire harness
View older results
Top Bottom