Search results

Search the forum Search Articles
  1. whitetrash21

    LML Topper shell shopping...

    Leer was color matched victory red, side window delete, front and rear windows tinted, carpeted and LED lighting....~1200. ARE was the same but had the windows in it and the front window was a slider....~1700 for that one.
  2. whitetrash21

    LML Topper shell shopping...

    I've used Leer and ARE. ARE was a little better quality....Ie, stiffer fiberglass (thicker maybe), nicer hardware. Leer was better price..... both work equally well....never had a gel or paint issue with either.
  3. whitetrash21

    Truck died while towing

    :D
  4. whitetrash21

    Truck died while towing

    Depends on the type of wood
  5. whitetrash21

    Axle Dump Exhaust

    I ran one. Cut up 5" mbrp, ran the axle bend towards the center and dumped behind the axle. Drone wasn't too bud but the truck was also on 12" of lift and 40s so it sat quite a bit higher than stock. You can see it in this pic.....sorry for the large by hugelayout. Guess it didn't re size
  6. whitetrash21

    LLY: 2 much smoke

    Limiter is 3200 under power. If you can find someone to do a live scan, watch your commanded/actual fuel pressures along with boost. Logging hose 2 should give a good idea which side of the fuel/air equation may be fu**ing up. Just pray it ain't electrical:D
  7. whitetrash21

    Pad and rotor kits

    :rofl: ....cuz stockpiling
  8. whitetrash21

    LLY: 2 much smoke

    Pressure test your CAC setup. Block both sides, one with a test guage and put 25psi in it. Let it sit for a few hours and see if it bleeds down. That'll tell you if you have any boost leaks.
  9. whitetrash21

    ? Tail gate up or down

    I'm surprised he can walk at all....some of the shit he went dippin in.....:rofl:
  10. whitetrash21

    Pad and rotor kits

    Helps to know a guy who works for a custom truck shop.....I get all the take off rotors/pads/tie-rods/etc that come off new trucks:D I've got enough to keep the truck.on the road for a million miles....motor may fall out before I run out of suspension parts:rofl:
  11. whitetrash21

    LB7: Hot start no fuel??

    If it does it again, try priming it without opening the bleed screw. The primer should be fairly stiff. If you can pump it easily a few times, most likely you're getting air in the fuel system. First thing I'd donis rebuild the filter head. Cheap and thyre notorious for developing leaks.
  12. whitetrash21

    Is anybody running a single battery if so any one in particular that works well ?

    I ran a single interstate for a while in my 05. Worked fine....it did crank slower but it always started.
  13. whitetrash21

    LB7: Hot start no fuel??

    Never use ether on these trucks....especially on a stock motor. Good way to blow something up. Have you checked the filter head to see if it's losing prime?? FPRV can cause rail issues, but I've never seen it cause a no start issue....if it was that far gone, the truck would be running like...
  14. whitetrash21

    "OFFICIAL" What did you do to your D-Max today?

    Swamp coolers are the shit.....I have the damn things stashed everywhere.....makes working in a 120* bearable:D
  15. whitetrash21

    Happy Birthday Josh H

    Happy bday Josh.... And Tom:rofl:
  16. whitetrash21

    Fastest stock 5 speed 1/4 times

    I managed a 13.2 out of my LLY on the stock 5 spd. Most times it was 13.3 - .13.5. Best mph was 108. Only weight reduction was backseat and spare tire removed. I could never get a decent 60 out of it..... 20's and mud tires were probably to blame:D
  17. whitetrash21

    LB7: Grit and grime under valve covers

    I do mine once a year....same way. Keeps the under-hood mostly clean of the real nasty shit
  18. whitetrash21

    Best Gin

    Lmao!! Especially funny considering Mike's location :D Rolling, smoking and sippin.......
  19. whitetrash21

    LB7: Grit and grime under valve covers

    Pressure wash before pulling it apart
  20. whitetrash21

    Happy Birthday Jeff and Matt!

    Happy bday guys
Top Bottom