Search results

Search the forum Search Articles
  1. coker6303

    Question: Limit straps

    So basically I need some qa1's in the front and ranchos in the rear (to cut cost). Controlling the lift on the front with the QA1 itself should cut down on squatting in the rear unless I'm thinking wrong sent telepathically via rooted ThunderBOLT
  2. coker6303

    Question: Limit straps

    So ranchos are good for the rear but almost useless on the front? sent telepathically via rooted ThunderBOLT
  3. coker6303

    Question: Limit straps

    Since you said shocks....Do the adjustable ranchos allow control on the compression, extension or both together? sent telepathically via rooted ThunderBOLT
  4. coker6303

    LBZ: New cp3,still p0087!?!

    I've got a buddy with a lmm and the same mods as me except he has the ppe race valve and ported fittings. His truck constantly throws the P0087 low fuel press code. May have to try the stock valve with a shim to see if it helps. sent telepathically via rooted ThunderBOLT
  5. coker6303

    Question: Limit straps

    It seems as though the front end lifting on the launch is what makes it so hard to keep from wheel hopping. Is it possible to put limit straps on the front, leave the torsion bars half way up and still get a smooth launch? Or am I wishful thinking? sent telepathically via rooted ThunderBOLT
  6. coker6303

    AirDog and Cat 1R0751 2 micron absolute filter

    Your welcome, glad I could help a little! sent telepathically via rooted ThunderBOLT
  7. coker6303

    Buyer Beware - Performance or Per4mance Innovations

    Can't turn them into BBB? At least his deceptive practices would be known to the local crowd without being on these forums. sent telepathically via rooted ThunderBOLT
  8. coker6303

    AirDog and Cat 1R0751 2 micron absolute filter

    sent telepathically via rooted ThunderBOLT
  9. coker6303

    AirDog and Cat 1R0751 2 micron absolute filter

    1r0749 is longer and has a 1" thread instead of a 7/8. I had a filter head for the 749 that I was going to put inline and use a 6-10micron filter on the airdog if I couldn't get the cat 1r0751 on the airdog. sent telepathically via rooted ThunderBOLT
  10. coker6303

    Nissan Duramax

    That's sick!! sent telepathically via rooted ThunderBOLT
  11. coker6303

    AirDog and Cat 1R0751 2 micron absolute filter

    Everything is working great. With the 2 Micron setup and no stock filter/housing and lift pump at 13 psi I'm holding 25.5-26000 psi on a 2800us tune. Actual and commanded stay very close on wot runs. sent telepathically via rooted ThunderBOLT
  12. coker6303

    LMM balance rates

    I run 2 stroke oil regularly. Most of the time the balance rate for #4 is 2.4-2.5 but sometimes its high like above. Just didn't know where it begins to cause problems or become noticeable. Thanks sent telepathically via rooted ThunderBOLT
  13. coker6303

    LMM balance rates

    I just checked my balance rates. looks like #4 is out of wack but I don't really know what I am looking at. What do the experts have to say???
  14. coker6303

    AirDog and Cat 1R0751 2 micron absolute filter

    What did I miss???? sent telepathically via rooted ThunderBOLT
  15. coker6303

    AirDog and Cat 1R0751 2 micron absolute filter

    I think i paid $20 for the 1R0751 which should be retail. I will have a guy who works for cat pick them up for $14 from here on out. I was going to leave a 10 Micron on the AD and put a cat 1R0749 down stream but i decided against it. Maybe later down the road! Just thought I would do this...
  16. coker6303

    what is this piece on the AirDog??

    That is a pic of an ADII165 that is only a couple of months old sent telepathically via rooted ThunderBOLT
  17. coker6303

    what is this piece on the AirDog??

    I couldn't see any inlet/ outlet holes in the cavities other than the bolt threads sent telepathically via rooted ThunderBOLT
  18. coker6303

    AirDog and Cat 1R0751 2 micron absolute filter

    Figured I would post this up, if you see something I did wrong please point it out!!! It takes a little grinding to make them fit. The Cat 1R0751 filter is a 2 micron absolute filter that is around 7" long and 3.5 O.D. which is bigger around and longer than the oem filter. These filters that...
  19. coker6303

    what is this piece on the AirDog??

    what are these pieces for?? 2 of them 180deg apart. Looks like they are too keep you from bottom the filter out, they have a slight amount of travel with a spring behind them.
  20. coker6303

    The 5 Day Thrash Begins !!!!!

    I'm dying here, need to see some runs of the black beast!!! sent telepathically via rooted ThunderBOLT
Top Bottom