Search results

Search the forum Search Articles
  1. DetailsUnlimited

    1st time in trans and need Help Please!!!!!

    Bump
  2. DetailsUnlimited

    1st time in trans and need Help Please!!!!!

    I know it's not the same but after many resets with V2 and individual taps. Well my trans.... If I was only racing it hauls ass! Light throttle it bangs into gear. P-1 pauses then goes into gear 1-2 dead space then bang grabs P-R pauses then goes into gear 2-1 down shift grabs quick 5-4 down...
  3. DetailsUnlimited

    1st time in trans and need Help Please!!!!!

    Yes, but I did it backwards. Fast relearn then reset taps. All I have right now is my V2. I'm about to reset all taps and then fast learn with it. But I don't think it works as well as the tech2
  4. DetailsUnlimited

    1st time in trans and need Help Please!!!!!

    If the c2 and c1 are engaged for 4th gear and are in perfect shape and still have a flare. What in the valve body controls this gear to be engaged. What should I be looking for? Sticking valve, spring?
  5. DetailsUnlimited

    1st time in trans and need Help Please!!!!!

    Went back in and found a piston had been damaged. And solenoid b. Now that it's back together I'm having the following issues. Shifting into 1st clunk shifting into reverse pause then clunks throttle light 1-2 upshift clunk medium throttle 1-2 clunk but not as hard 5-6 upshift and downshift...
  6. DetailsUnlimited

    1st time in trans and need Help Please!!!!!

    This is repost but i have no clue whats wrong. So here goes... Refreshed trans and all went well. Replaced c1-c4. The only reason for this was a rpm flare on3 to 4 upshift. Put back in truck and filled with fluid and ran thru all gears and test with tech 2. Went for a drive and all gears shifted...
  7. DetailsUnlimited

    Trans will not shift out of first gear?

    Tech2 is not reading any pressure on solenoid B. Pulled pan and VB and removed solenoid cleaned reinstalled and still no good. Will order new one and replace.
  8. DetailsUnlimited

    Trans will not shift out of first gear?

    All plugs checked and good. Still no codes. 1st and reverse still. Will solenoids and stuck valve tommorrow. Thx for the help. Will post what I find.
  9. DetailsUnlimited

    Trans will not shift out of first gear?

    Monday I can get a tech 2 on it but sol for now.
  10. DetailsUnlimited

    Trans will not shift out of first gear?

    1st thing I did and there where none?
  11. DetailsUnlimited

    Trans will not shift out of first gear?

    Refreshed trans and all went well. Drove for awhile after and did a few run throughs. Then went to store to pick up a few things and back. This morning went to drive and now will notl shift out of 1st. What is my next step to finding out why?
  12. DetailsUnlimited

    Top 25 Stock Duramax's

    I'm putting it out there just to be sure. I bought a brand new lbz cp3 from the dealership and sent it to Danville. It was only $120 bucks so it couldn't of been much.
  13. DetailsUnlimited

    Top 25 Stock Duramax's

    There are alot of grey area's. Mod a lb7 reg brings it up to a lbz same as lly but mod a lbz is qustionable?
  14. DetailsUnlimited

    Top 25 Stock Duramax's

    I havnt tried to get on this list yet but does my modded lbz Regulator pump put me out?
  15. DetailsUnlimited

    LB7: What need to be logged for smoking at idle?

    Just installed new lbz pump and 45% overs and ad165 on a lb7 and runs fine but on start up it burps black smoke and has a light haze at idle. What needs to be looked at or what do I need to logged to find my changes. This is a first for me on a lb7. Thx Gaylon
  16. DetailsUnlimited

    LBZ: 1 bad injector causing p0087?

    Yep!
  17. DetailsUnlimited

    Whats needed for a S366 steup kit?

    Buying a S366, so what all do I need? I like the turbonetics ped because of the future wastegate on it. What about the HTT? I can get oil lines made for top, but what about the drain tube. Can this be made from braided line as well? Does it have a threaded hole? thx for any help.
  18. DetailsUnlimited

    Anyone need oil lines?

    Pm me prices on a S366 lines
  19. DetailsUnlimited

    Joplin, Missouri tornado

    Glad your ok Mike!
  20. DetailsUnlimited

    Crossing the Mississippi River

    I40 was closed for a week or so because of flooding in Arkansas but has reopened.
Top Bottom