Search results

Search the forum Search Articles
  1. prostreeter600

    Question: Are 9s achievable with Allison 6 speed and 3.73 gears

    Are 9s achievable in the 1/4 with a 6 speed allison and 3.73 gears or are the 3.54 gears an absolute must to get into the 9s ? I'm guessing at the weight of my empty truck being approximately 5000# without driver .. Until I get my new setup put back together and back in my truck I won't be able...
  2. prostreeter600

    Question: Fastest 1/4 on street tires

    Seems that 10s are very achievable on street tires . I think its beautiful that our type of trucks can run 10 sec 1/4 mile times at the track then duplicate it on the street on street tires 4x4 trucks that is . I find it amazing !
  3. prostreeter600

    Tubing a 265/75R16

    I'm with Burn Down , scuff it up with rough grit paper and put a bit of JB weld on it . Let it set up good and you should be good to go
  4. prostreeter600

    Regular Cab's

    I can't wait to get my new engine put together and back in its hard being patient but I know it will be faster than its ever been
  5. prostreeter600

    Regular Cab's

    Not sure about that . Perhaps someone that has done that can chime in . Don't wanna steer you wrong
  6. prostreeter600

    Regular Cab's

    Your correct on the sway bar . It is hollow. I did it to have more control on the weight transfer with the adjustable coilovers in front . The sway bar tends to not allow the front end to come up at all. On the same note you don't want to unload the front too much hence adjustable front...
  7. prostreeter600

    Regular Cab's

    Not a lot of weight to be saved by cutting that piece out . I wouldn't cut it out
  8. prostreeter600

    Regular Cab's

    No . It handles just fine . I guess the fact that its lowered helps considerably
  9. prostreeter600

    Regular Cab's

    Sure did . I had bought some super big Helwig sway bars for front and back . Then I changed my mind and removed the stock one . So now I'm trying to sell the Helwigs
  10. prostreeter600

    Regular Cab's

    I did it for the weight savings as well as control I haven't gotten to the scales yet and won't till I get my new built motor back in . And Yea its cool too .
  11. prostreeter600

    Regular Cab's

    I think the springs up front IIRC were rated at 1100#. S&W set me up with 400# for the rear I think after I had told them how much my truck weighed with just the rear tires on the scales , and that was when I had my long bed . They work great with the short bed as well . I have my 2 batteries...
  12. prostreeter600

    Regular Cab's

    Front coilover setup came from a place in Austin Tx called DB rods 512-809-1854 . I believe Dustin at ATP turned me on to them . The rear setup I got from S&W racing . It's a HD 36" ladder bar and coil over setup with a pan hard bar .
  13. prostreeter600

    Question: Fastest 1/4 on street tires

    Hell ZF if you fix the mounts it bound to pickup a tenth . Lol
  14. prostreeter600

    Question: Fastest 1/4 on street tires

    Alot of impressive times even at full weight with a variety of different tire brands .
  15. prostreeter600

    Question: Fastest 1/4 on street tires

    I may go back to Nitto 420s once I were out my NT05s . It would be very interesting to see what my truck will do with my new setup
  16. prostreeter600

    Question: Fastest 1/4 on street tires

    Mike Moore , what kind of power was he putting down to run low 10s on ATs ? Talk about a sleeper .
  17. prostreeter600

    Question: Fastest 1/4 on street tires

    Hondarider, what kind of power you putting down to run that # on 420s ?
  18. prostreeter600

    Question: Fastest 1/4 on street tires

    All those times are impressive, especially those on AT tires , those things are heavy . Local 1/8 track has an event this Saturday with a $3200 payout I believe where no slicks or drag radials are allowed , only street tires . I wish my motor was back together . I'm gonna go check it out...
  19. prostreeter600

    Question: Fastest 1/4 on street tires

    Just out of curiosity , what is the fastest times in the 1/4 on street tires ? ET & MPH ? What size and what tire were you running on tire pressures etc .
  20. prostreeter600

    LLY: Temporary Tie Rod sleeves

    All I put on mine was the tie rod sleeves and the pitman arm and idler arm braces . That should do the trick .
Top Bottom