Search results

Search the forum Search Articles
  1. DIESELMAFIAPER.LB7

    can't talk to ecm class 2 issue

    Its all plug and play whats connections I needed to put together between aftermarket harness and new deck are soldered so should resistance be around 1-3 ohms? Edit: ill check the sp205 again
  2. DIESELMAFIAPER.LB7

    can't talk to ecm class 2 issue

    Yes in between the rear audio controller and obd2, im going to test between the ecm and obd2 port tomorrow go from pin 2 in the obd 2 to pin 9 on the ecm which is circuit 2362??
  3. DIESELMAFIAPER.LB7

    can't talk to ecm class 2 issue

    circuit 2288 has continuity to pin 2 on the obd2 port so the class 2 circuit is good has around 13-15 ohms resistance between the truck side of the harness and odb2 port cant find if that's in spec or to high? Edit: I tested it to the rear audio controller I have no connection issue on the...
  4. DIESELMAFIAPER.LB7

    can't talk to ecm class 2 issue

    no rear dvd u1000 on digital radio receiver and rear seat audio controller that's it now I had lots of others but after I swapped the bcm to a different one and put the original back in they went away also fixed my seat reclining motor and a bad limit switch on the seat to also a b0951 headlamp...
  5. DIESELMAFIAPER.LB7

    can't talk to ecm class 2 issue

    well after reading my manuals and testing grounds and power and class 2 wires im not seeing anything out of the ordinary I hate to just keep replacing modules but damn this starting to look like the only thing left to try. I couldn't find a diagram for the c306 bale connector inside the...
  6. DIESELMAFIAPER.LB7

    Cknight199 motor build thread

    X2 make triple sure its not hard parts
  7. DIESELMAFIAPER.LB7

    pressure in the coolant system

    Yes sometimes that'll give you a clue
  8. DIESELMAFIAPER.LB7

    pressure in the coolant system

    Ended up being a cup again
  9. DIESELMAFIAPER.LB7

    Cknight199 motor build thread

    Uh what? Post a video of you driving doing said Issues
  10. DIESELMAFIAPER.LB7

    can't talk to ecm class 2 issue

    Lb7 > lly..... :D Back to the pos lb7 tho...... I replaced bcm got half as many class 2 codes truck still won't flash not sure if the bcm needs to be programed to the truck first or if they even can where it won't tune the ecm. I'm getting codes for the restraint module believe it's under...
  11. DIESELMAFIAPER.LB7

    The build is a GO!

    Way I look at it oil is a lot cheaper then a motor
  12. DIESELMAFIAPER.LB7

    Upgrade: GT4094r v S366/74 Doublebat

    Ya just hate to throw 400-500 bucks at the turbo that'll I'll probably get rid of anyway
  13. DIESELMAFIAPER.LB7

    The build is a GO!

    This what I'd did except I started it ran it for 30 mins or so to warm up and check for leaks ect and then changed oil drove it 50 changed it again ect ect oil has been changed 5 times in 2800 miles lol
  14. DIESELMAFIAPER.LB7

    Upgrade: GT4094r v S366/74 Doublebat

    83 going to try a 87 but I doubt it'll make the difference I want
  15. DIESELMAFIAPER.LB7

    Upgrade: GT4094r v S366/74 Doublebat

    My 66 drove great for a dd I hate my 476 on how it dd's I had 45 overs and 80 overs both and the 66 drove great pushed to 700rwhp and a 12.15 in a full weight ccsb also put around 25-27k miles on it never skipped a beat and is still in good shape it may get a refresh and a 67 or 69 wheel and go...
  16. DIESELMAFIAPER.LB7

    diesel power challange 11

    Cory chomos hopefully will have better luck I thought about entering as it's only a 6-7 hour drive from me and I always play at altitude but I'm not going to spray the bejesus outta my truck for dyno numbers I'd just be consistent and not break shit.... so I wouldn't get in lol
  17. DIESELMAFIAPER.LB7

    Rumors and lies

    I think a mod should go clean up her build thread and re open it well smash this and talk about the truck
  18. DIESELMAFIAPER.LB7

    Rumors and lies

    Don't worry about people they'll never leave you alone regardless if you sell it or keep it so just have a 10 sec truck and tell the little kids to put up or shut up :thumb: I deal with diesel drama locally on a almost daily basis with quite a few dbags
  19. DIESELMAFIAPER.LB7

    Rumors and lies

    Like I said in your build thread I wondered what's true and bullshit on the fb threads.
  20. DIESELMAFIAPER.LB7

    Cknight199 motor build thread

    Well I'd say a 8 sec 1/4 mile time is saying a lot to what fingers did. You wanted forged so you'll have to deal with the quirky things of that decision. If you decide to go big power and make it a race truck then you'll be set
Top Bottom