Search results

Search the forum Search Articles
  1. prostreeter600

    Lowest Safe air pressures for drag racing on Drag Radials

    How much air pressure Evan ? Is he running a stout coil over in the front to control front end rise ?
  2. prostreeter600

    Lowest Safe air pressures for drag racing on Drag Radials

    Noted on the traction bars , and my shock adjustments in the rear were set in the middle . I tighten them all the way so that it's harder to compress them . I moved ladder bars to bottom hole in the front .
  3. prostreeter600

    Lowest Safe air pressures for drag racing on Drag Radials

    20--22 start point sounds like a good idea .
  4. prostreeter600

    Lowest Safe air pressures for drag racing on Drag Radials

    Im gonna try it again with the adjustments I made as well as lower air pressure . If that doesn't net me at least in the 1.5s. I'll go to a stronger coil over -- like a Viking or similar with stronger valving .
  5. prostreeter600

    Lowest Safe air pressures for drag racing on Drag Radials

    Wider wheels have crossed my mind . Reason I run those 9s is because I could get them in a 5.75 backspace as well as if I went to an 18x10 with 4.5 backspace the truck won't go on the trailer due to tires sticking out too far . I didn't realize that you had personally run the MTs yourself at 4...
  6. prostreeter600

    Lowest Safe air pressures for drag racing on Drag Radials

    Ne-Max I will run lower psi and mark tire & rim
  7. prostreeter600

    Lowest Safe air pressures for drag racing on Drag Radials

    Suggestions to control the Bounce ???
  8. prostreeter600

    Lowest Safe air pressures for drag racing on Drag Radials

    Yea I'm with Trojan 12 psi probably applies to a 2 WD race vehicle that weighs much less than my 5900# . I would shit my pants if I made a run on 12 psi .
  9. prostreeter600

    Lowest Safe air pressures for drag racing on Drag Radials

    Got kicked off for going too fast no cage ?
  10. prostreeter600

    Lowest Safe air pressures for drag racing on Drag Radials

    https://m.youtube.com/watch?v=zImb0GDKYaI&feature=youtu.be. If you care to study the launch . I tighten up my rear coil overs to the tightest setting and adjusted my ladder bars to the lowest hole since this run . My ride tech front coil overs were already at the tightest setting . I'm due to...
  11. prostreeter600

    Lowest Safe air pressures for drag racing on Drag Radials

    Were you running tubes or tubeless ? What pressures did you run and did it 60' well ?
  12. prostreeter600

    Lowest Safe air pressures for drag racing on Drag Radials

    First off all my info is in my sig. Truck race weight is right at 5900# . RCSB. Last time I ran it it spun out of the hole. I was running 28 in the front and 26 in the rear . Track prep wasn't the best . How low can I go and still safely run 140--145 MPH with out fear of breaking the bead etc...
  13. prostreeter600

    Anybody have any 1/2 mile info?

    Good Luck Mark have fun . Sub for results
  14. prostreeter600

    Fastest Single Turbo Duramax

    On a single 88mm . Damn that's huge for a single . You must have a good loose converter to spool that sucker or are you spraying at the line to get on top of the charger ?
  15. prostreeter600

    Fastest Single Turbo Duramax

    Street truck or race truck ? Is that when you were running the single 80mm ? 2 x4 or 4x4 ? What was the weight with driver . I'm just curious . Very impressive for a single turbo .
  16. prostreeter600

    Rear frame C notch

    ^^^^^^^^
  17. prostreeter600

    NHRDA World Finals 2016

    FYI--No Test N Tune on Friday . I wanted to go get some runs in on Friday but they only do the Pulls on Friday now .
  18. prostreeter600

    8.395 @ 168 mph!!

    Damn you guys are early to rise . Lol
  19. prostreeter600

    8.395 @ 168 mph!!

    Congrats Brett ! Cooler weather should make it even more interesting . Your truck is awesome !
  20. prostreeter600

    Dyno roller and Hoosier Drag Radials

    Good to know . Kinda what I had previously read . Thanks
Top Bottom