Search results

Search the forum Search Articles
  1. BHoward6.6

    Torque steer when in 4WD

    So I removed all my steering components Tue evening, took about 2 or 3 hours. The pitman arm was not to bad with a custom puller. Started the install of the Kryponite CL, tie-rods, idler box, idler gusset, moog pitman & idler arms, cognito Pitman / Idler support kit, and Bilstein Steering...
  2. BHoward6.6

    Torque steer when in 4WD

    I don't recall this happening before I went to the track last time. I have tie-rod sleeves. How do you check to see if there is any play in the idler, pitman arm and the tie rods? Torsion bar bolts are good.
  3. BHoward6.6

    Torque steer when in 4WD

    So I was at the drag strip a few weeks ago, on the last pass the truck (in 4WD) was pulling to the left (drivers side), I had the wheel turned 1/4 turn to the right and the truck was still pulling to the left, hard enough I had to let out of it. Now It pulls to the left in 4WD when I give er...
  4. BHoward6.6

    LMM: Bad turbo

    Turbocharger Replacement Takes about 2 days if you havent done it before. The worst part is the upper up-pipe bolts. A 12 point 12mm socket with a 2 1/2" ext. Good Luck ' Removal Procedure Notice: If a turbocharger has failed, clean any turbocharger debris or excessive oil from the charge...
  5. BHoward6.6

    efilive tune for vane control

    The main engine harness on the top of the motor, take the two apart and inspect the pins for corrosion. Clean the pins, apply a little dielectric grease, reassemble. I had the same issue and this is what it was.
  6. BHoward6.6

    Efi live

    Depends on who it is from.
View older results
Top Bottom