Search results

Search the forum Search Articles
  1. SickLL7Crenshaw

    Ranch truck 1/4 times

    Took my beater to the track Friday night for some fun. Truck surprised me non the less. Stock injectors, cp3, and turbo. Motor and cp3 has 297k on it and is getting a little tired as it's starting to loose rail. Fastest pass was a 12.71@104 with a 1.71 60' and also ran a 7.98@84 in the 1/8...
  2. SickLL7Crenshaw

    Busted Danville pinned pump

    Well that's scary... hopefully just 1 in a 1,000,000
  3. SickLL7Crenshaw

    Have an annoying problem

    Both my front factory bed mounts are broke off right at the frame where they are riveted.. it goes through hell on my route. I'll get some pics of the lean and broken mounts tomorrow. We've tried fords back in the early 2000s, they didn't hold up worth a shit and we ran 80 model 1 tons for feed...
  4. SickLL7Crenshaw

    Have an annoying problem

    MANY holes I have hit bouncing across pastures lol drives straight but if you pull the air out of the bags talk about a cholo lean
  5. SickLL7Crenshaw

    Have an annoying problem

    Frame is bent, 3-4" starting from the pass side behind cab going downhill torwards the back. Just the pass side. Axle wasn't hurt other then cracked, welded it up and found a Polly bushing to throw in the TB mount. Just loaded 4K of feed on it and gonna run it till the wheels fall off. Bent so...
  6. SickLL7Crenshaw

    Top 53 RWYB Street Legal List

    6800lbs CC/SB LLY on 30x14 cheaters
  7. SickLL7Crenshaw

    Wheels

    16x10 Pro Comps with the M&H 30x14. ~54lbs a corner.
  8. SickLL7Crenshaw

    Wheels

    Same setup I ran for 2 years. Loved them but next go round in buying some light 18x10 and running Hoosiers new cheaters that are rated for more weight.
  9. SickLL7Crenshaw

    Have an annoying problem

    Damn that's impressive. Wonder how the thick our axle tubes are.
  10. SickLL7Crenshaw

    Have an annoying problem

    Two weeks old, ~500 miles James would you know where to get a derlin bushing or do you have the part number or specs handy? I'm not sure I can find one before Monday. Feed days are MWF so I may just have to throw another stock one back in until I find one because. We have a spare zf6 sc/lb...
  11. SickLL7Crenshaw

    Have an annoying problem

    Ya I was thinking the same, ya it's got a few dents but we try to take care of our rigs the best we can while working them hard but gonna get a cow or bull run into you every once in awhile. It's typical for our feed pickups to have a 5-8 year life span depending on if we get rain and we don't...
  12. SickLL7Crenshaw

    Have an annoying problem

    Been abused Axle leaks, drivers side, i cleaned it up and found a crack at the weld. Pass side, just scrapped dirt off it, this one was actually dripping on the floor.
  13. SickLL7Crenshaw

    Have an annoying problem

    LCA bushings were good, went ahead and replaced them though while I had it tore down that far.. Old ones didn't have any play or front to back movement. Looking to find the correct Derlin bushing for the mount now. Besides that, found another problem on this poor bastard of a truck. We run air...
  14. SickLL7Crenshaw

    Have an annoying problem

    All other cab and core mounts are cherry so not sure what's happening there. I can live with it as that thing has been breaking for the last two years but the torsion bar bushing on the other hand.... pisses me off. I may do a little more checking on those bushings in the LCA and I will...
  15. SickLL7Crenshaw

    Have an annoying problem

    Yep Reger everything in that department looks great. Zero rust on the truck also.
  16. SickLL7Crenshaw

    Have an annoying problem

    Ok guys long story short, most of you know I ranch and beat the piss out of ranch Duramaxs out here. Anyways I been using a 02 ecsb 4wd for a feed pickup. Every other day in the winter and spring I load 2500lbs plus 800lbs of feed and mineral on the ass end of this truck to run my feed route...
  17. SickLL7Crenshaw

    Help: Anybody near Gallup NM with a code reader?

    Wish I woulda saw this earlier, have a guy in the Farmington/Aztec area that has a V2 that coulda helped you out. Unfortunately I'm 6.5 hrs from Gallup lol
  18. SickLL7Crenshaw

    Fully deleted lmm smoke at idle

    I cleaned my LMM up with pilot and idle timing along with some rail pressure adjustments. No more eye watering smell or haze at idle.
  19. SickLL7Crenshaw

    1166hp/1631tq Stock Bottom LML

    I wanna say 8xx Shane but i could be wrong. Was a lot of high hp rigs that day lol
  20. SickLL7Crenshaw

    1166hp/1631tq Stock Bottom LML

    Not while I was there no. Didn't even see it.
Top Bottom