Search results
-
Last Minute Callout Build
9100af cam is correct. For the fuel I contacted Rick @ Exergy & they really stepped up to give us sponsorship support. We have a set of 500% LBZ injectors & two 12mm stroker pumps here. I was concerned about tuning such large injectors with limited time so one night last week they were put in... -
Last Minute Callout Build
The 10 bolt will never last with the new setup. I wasn't expecting it to survive the stock racing we did. I have a brand new 14 bolt & a Yukon locker ready go in the truck when it gets back. We'll also need to get a rear driveline built. -
Last Minute Callout Build
Plan for the turbos is big triples with a new Wagler intake & twisted pedastal. A/C has to go since we won't have the extra time to try to work around it. While Scott works all that out we're putting the race engine together. Short block is ready & we're waiting on heads to show up from So... -
LLY: RCSB 1500 LLY round 2
Started a thread here to follow what happens next http://www.duramaxdiesels.com/forum/showthread.php?t=70834 -
Last Minute Callout Build
Really didn't plan on this at all So we blew the stock motor in the 1/2 ton LLY a few weeks ago. After some debating we decided to try running super street this year. Shipped the truck 29 hours to my buddy Scott @ SDP. While my truck is there, I call Scott to talk turbo specs & the conversation... -
LLY: RCSB 1500 LLY round 2
I agree! Maybe that's why we have so much more fun than those snobs! -
LLY: RCSB 1500 LLY round 2
I hear ya man. I took no offense at all. The argument for gas & diesel racing ends on this point. The diesel guys (especially Dmax guys) are just a much funner crowd to hang around with. You can rub elbows with the top guys in the industry & you'll never know it by the way they act. And... -
LLY: RCSB 1500 LLY round 2
I absolutely disagree. There have always been gassers racing. Cars, trucks, mopeds. The diesel stuff is new. If you look at NHRDA super street records for the last 5 years, it's unreal how far it's come. 10 second gassers have been around forever. 5 years ago this stock motor LLY would have set... -
LLY: RCSB 1500 LLY round 2
Yes way too soon! Hail Mary for sure... -
LLY: RCSB 1500 LLY round 2
The blue Pro Street truck is actually up for sale. It pains me but we ended up going in another direction with the race program this year. It's a long story but this little black truck is supposed to be in the ultimate callout challenge in place of another truck that won't be ready in time. Now... -
LLY: RCSB 1500 LLY round 2
Ok we made it through the winter without tearing anything up & the tracks finally opened around here. We took the truck out to Caprock Motorsports park in Penwell (Odessa) a few weeks ago. Tried launching in 2nd & finally got my 60' down to a 1.57. I kept running the same 2800us tune that ran... -
sump or draw straw needed with fass?
I've been wanting to try the Bean's sump. Seems everyone likes it. We install a sump with every 15+. We've had trucks run much worse with a lift pump than without if we try to use the stock pick up tube. -
Duramax wire tuck
Man Josh that is by far the best job I've ever seen on wiring! Time well spent:thumb:- meshanic
- Post #12
- Forum: Appearance & Detailing
-
FASS for '15 LML?
Pump will work fine just like dmax02 said but you need to add either a draw straw or sump to the install. They made a change to the sending unit of the 15s that's more restrictive. We've seen some defuel bad after we installed a lift pump so we install a sump on every 15+ -
Brett Deutsch's current motor finally on the engine dyno!
It hit peak hp sooner in the rpm range & stayed up there! That with less cylinder pressure is awesome! Great info Mark:thumb:- meshanic
- Post #90
- Forum: Dynamometer
-
cracked piston
Really good tech here guys! Speaking of building the bottom the best way possible, how do you guys feel about billet main caps compared to dowel pins in the stock caps? I'm having my billet main caps dowel pinned because I already had the billet main caps line bored when I started hearing about...- meshanic
- Post #31
- Forum: Duramax Engine Building
-
Top 53 RWYB Street Legal List
New best time for the 1/2 ton. Right lane- meshanic
- Post #631
- Forum: Drag Racing
-
1/4 mile discussion and time slips post here!
Duramax/Allison swapped 1/2 ton 4wd with mods in sig. 10 bolt rear end with a true trac. Chris did head gaskets & studs. Other than that it's a stock 194k mile LLY. I added a 150 shot since my 10.93 run.- meshanic
- Post #1,595
- Forum: 1/4 mile 10.999 or quicker Duramax-powered list
-
1/4 mile discussion and time slips post here!
Actually it was 10.58. Still on stock bottom end.- meshanic
- Post #1,593
- Forum: 1/4 mile 10.999 or quicker Duramax-powered list
-