Search results
-
-
Single stack
Where's the like button? X2- 05chevy
- Post #46
- Forum: General Fuel System & Exhaust Questions
-
Hi From the Eastern Shore of Maryland!
Welcome. I'm for around Frederick area. Cummins country Around me but Dmax are slowly coming around- 05chevy
- Post #6
- Forum: Introductions
-
LLY: LLY loping at idle
I'd say fpr. Fuel pressure regulator going bad.- 05chevy
- Post #4
- Forum: Smoke Signals
-
In the 600s now!!
I have been 11.69@115 with a 1.80 60' so I'd say your boarder line- 05chevy
- Post #26
- Forum: Dynamometer
-
In the 600s now!!
Truck was 550hp and 1000ftlb. For year and half and a boat load of passes and pulls. Truck made 685hp and 1100ftlb as Devon said. Truck still had stock head bolts when the gaskets went. But I don't believe the HP was what made them go. It was the 4500rpm pulling that caused it. Good numbers...- 05chevy
- Post #22
- Forum: Dynamometer
-
LBZ: Twin boost problems
It was rescaled for a s&b intake but not since we added the twins- 05chevy
- Post #3
- Forum: Duramax Tuning, Logging, and Gauges
-
LBZ: Twin boost problems
A buddy And I installed a 475 over stock twin setup with 60% nozzles. The truck has plenty of fuel. It will smoke till the turbo really light but will only make 40psi. I tried opening the vane position from 35 and 1800 across the board. Thinking the small turbo might be choking the larger...- 05chevy
- Thread
- Replies: 6
- Forum: Duramax Tuning, Logging, and Gauges
-
Cranks
Dumb question but most of the cranks with failures. Where they stock, built, balanced, unbalanced or a little mixture of all? I can understand if the crank has a weak spot or edge from manufacturing that would cause a starting point. But wouldn't a balanced rotating assembly have less of a...- 05chevy
- Post #18
- Forum: Fingers 412-638-9026
-
LB7: IHI Port/Polish
Dirt can cause the wheel to start doing that- 05chevy
- Post #153
- Forum: Turbo Talk
-
LBZ: Reduce engine power
That was suppose to be keeps. Lol fat fingers and touch screen don't do well together -
LBZ: Reduce engine power
Buddy of mine keeps getting reduce engine power when he hits a decent size bump in the road. Any idea of what could cause it? -
LBZ: Question for twin owners
No we have not changed the vane position in the tune. Should I open up the whole table of just high rpm?- 05chevy
- Post #11
- Forum: Duramax Tuning, Logging, and Gauges