Search results

Search the forum Search Articles
  1. P

    Can I bypass lb7 fuel block?

    the PPE CP3 High Flow Feed Line Kit eliminates the restriction of the factory fuel test-port / fuel block by re-routing the fuel from the fuel filter housing directly into the CP3 pump
  2. P

    Can I bypass lb7 fuel block?

    Yea doesn't that bypass the block?
  3. P

    Can I bypass lb7 fuel block?

    Ppe sells a kit with fitting and hose
  4. P

    Can I bypass lb7 fuel block?

    Can I run the ppe high flow nozzle and bypass the fuel block containg the fuel press sensor? I know I can. But will my check engine light stay on?
    • pat5001
    • Thread
    • Replies: 15
    • Forum: LB7
  5. P

    please help program error no start

    after the batt reset it wont read at all. looks like ill call edge on monday then maybe the dealer
  6. P

    please help program error no start

    when i turn the key on it says trying to unlock module thats it
  7. P

    please help program error no start

    can i just take my ecm?
  8. P

    please help program error no start

    Please help i have a 01 duramax lb7 with a edge cts diesel, it always works fine. But today i went to switch it from level 2 to level 3 and when it was programming i accidently cranked the truck. Now iit wont start and i have no commutation with the programmer or scan tool. what do i do now its...
  9. P

    Help p0773 Shift Solenoid E Electrical

    So I tested all 3 cold, at the tcm and they are ok 20ohms. Then tested hot they were all ok 30 ohms. I can turn them on/off with my scanner and truck shifted fine. Is this a interment problem with the solenoid itself? Do they go bad?
  10. P

    Help p0773 Shift Solenoid E Electrical

    Ok I didn't think so. That's just what the guy claimed. Is it ok to drive till I can look in to theses solenoids? I am 99% sure my tcm and tcm wiring is ok I never through that code before. Can the solenoid be a interment problem?
  11. P

    Help p0773 Shift Solenoid E Electrical

    Does my tranny have to relearn on stock power level then move up?
  12. P

    Help p0773 Shift Solenoid E Electrical

    So the solenoids are powered all the time and the tcm grounds them so I should back probe the tcm and turn the solenoid c on/off and see if it changes.
  13. P

    Help p0773 Shift Solenoid E Electrical

    Ok thanks mike. How's the c-3 clutch oiler remake going?
  14. P

    Help p0773 Shift Solenoid E Electrical

    its a 01. redline steels and clutches. its got a stage 2 trans go kit and a bd valve body with a heavy duty convertor its not a 3 or 4 disc. just a step up from stock.
  15. P

    Help p0773 Shift Solenoid E Electrical

    They claimed it was fine. I drove it for like 20 miles with no problems. And yes I did new filters and deep pan.
  16. P

    Help p0773 Shift Solenoid E Electrical

    Please help p0773 Shift Solenoid E Electrical. Just put this built trans in it's got 25k on the build. Stage 2 trans go bd valve body hd converter.
  17. P

    New c-3 oiler design. On the way?

    why it didnt work?
  18. P

    New c-3 oiler design. On the way?

    I called today and they said after the first of the year.
  19. P

    New c-3 oiler design. On the way?

    I called mike and he said he was redesigning it I want one when the are done.
  20. P

    2wd Allison in a 4x4?

    thanks mike thought so
Top Bottom