Search results
-
Exhaust question
I'm just afraid of the drone and being too loud, that's all.- OnixMax
- Post #7
- Forum: General Fuel System & Exhaust Questions
-
Exhaust question
I want to keep a quiet truck, but once I get down to Nick @ DuramaxTuner, I'm afraid the stock exhaust may keep EGTs too high..- OnixMax
- Post #5
- Forum: General Fuel System & Exhaust Questions
-
Exhaust question
Anyone? Even if I welded a 3.5" to 4" adapter just before the muffler and went to a 4" muffler out, would I see a drop in EGTs?- OnixMax
- Post #2
- Forum: General Fuel System & Exhaust Questions
-
Exhaust question
I've looked through a lot of threads, and haven't found anyone who has done this. First, I don't want my truck to be loud, I just want a little better flow. Would a 3.5" in 4" out muffler and 4" tail pipe (Diamond eye sells just the after-muffler components) see any real increase in...- OnixMax
- Thread
- Replies: 20
- Forum: General Fuel System & Exhaust Questions
-
LB7: Low Coolant?
I'll fill her up and keep a close eye. Worst comes to worst, take the damn thing apart again lol. Sent from my iPhone using Tapatalk -
LB7: Low Coolant?
Fair. That said, I filled the coolant to the 'Cold' line and it took almost 10k miles to get low. With that slow of a leak (assuming that it's a cup), is it worth tearing back into it? Should also be noted that I get NO smoke of any kind when at idle, or normal driving. -
LB7: Low Coolant?
I'm installing my S&B intake this weekend, so I'm gonna get underneath and see if I can see any leakage from the water pump, or otherwise. I'm also gonna throw some more G05 in there and see what happens -
LB7: Low Coolant?
Coolant overflow tank doesn't have any bubbles, no About 9,500 miles. I only resealed the cups that came out with the injectors. That said, I did verify that they were all seated properly. I can easily squeeze the upper radiator hose after the truck's been off. I'm wondering if maybe there... -
P0088 P0193 LB7 after changing injectors
I got your answer. Mine was the sensor next to the fuel rail. The Fuel Rail Pressure Sensor. One of the wires wasn't making contact. Installed a new sensor, and she fired right up -
LB7: best injectors
Do yourself a favor and buy from Brent @ Lincoln Diesel. Was nothing but helpful, and he offers the cheapest OEM injectors on the market that I've seen. -
mpg not what I expected
I'm running completely stock. 14-15 city, 18-20 hwy @ 65mph. Towing doesn't seem far off, imo. Got 14 towing on the hwy, pulling about 6k. -
LB7: Low Coolant?
Hi all, I've got an 03 Silverado 2500HD LB7. Just rolled 200k on the odometer. This morning, I got a low coolant light. I didn't see any leaks running, or not running. Background on truck: Bought at 185k. All 8 injectors at 190k. Lifted 2 cups, and re-loctited and reset them. Swap... -
LB7: going to try do injectors 2002 lb7
Brent is the only place. Cheapest, and 100% best service of any vendor I've ever dealt with Sent from my iPhone using Tapatalk -
LB7 injectors
Do yourself a favor and just call Brent at Lincoln Diesel. He has been with me every step of my injector install, and troubleshooting issues with my install. He even said it was a better option to troubleshoot than to buy a new sensor FROM HIM. Straight shooter, and cheapest Bosch remans you can... -
Pigtail/connector part numbers?
Beautiful, thank you Sent from my iPhone using Tapatalk -
Pigtail/connector part numbers?
Hey everyone, Found the root of my problem (I think).. Broken connectors. Anyone have the part numbers for the pigtail connectors for the Fuel Pressure Regulator and the Fuel Rail Pressure Sensor? Sent from my iPhone using Tapatalk -
Injector Help Needed
I would think the blue marks are just indications of long exposure to high temperatures. Shouldn't be anything to worry about. As for the fuel consumption, LB7s are notorious for bad injectors. My fuel consumption skyrocketed and my injectors were plugged big time Sent from my iPhone using...