Search results

Search the forum Search Articles
  1. cmmiller53

    RCSB LBZ Build

    Big news! I've got windows and locks now, was missing a wire from Fuse block I/P C1 spot E5 that was DDM Class 2 Serial Data, which explains why I had no communication with the DDM
  2. cmmiller53

    RCSB LBZ Build

    Alright hooked up to the computer again, have no communication with the DDM, the tech thought that maybe I had a bad driver door module and suggested I try that first, so I took one out of a buddies truck to see if it would plug and play, that didn't work, so now I have to try and figure out...
  3. cmmiller53

    Nitto 420 roll call.

    I ran them on both my crew cab and my single cab, 305/50r20 on an AE 20x10 -24 offset. Little rubbing on the crew cab with just 3 inch drop on the rear and they don't rub on the single cab that's lowered even farther, have a set of toyo proxies on 20x9 race lines sitting in the shed, they seemed...
  4. cmmiller53

    RCSB LBZ Build

    Thanks man, I fabbed up a new exhaust while the bed was off to eliminate the stack and dump it over the axle as well!
  5. cmmiller53

    RCSB LBZ Build

    Does anyone around the NE Indiana area or NW Ohio have a Tech 2 or the ability to reflash my BCM and help me finish getting my power windows wrapped up, my sources keep pushing me back further and further and I would just like to get it finished and wondering if anyone could help me out!
  6. cmmiller53

    RCSB LBZ Build

  7. cmmiller53

    RCSB LBZ Build

    Ya I plan on cleaning it up while it's off and probably changing the exhaust setup to, I will get some more pictures of the fuel setup tomorrow after work [emoji106]
  8. cmmiller53

    RCSB LBZ Build

    what a terrible place to put batteries
  9. cmmiller53

    RCSB LBZ Build

    Thanks! I've got some stuff getting painted in the next couple weeks
  10. cmmiller53

    RCSB LBZ Build

    No updates on the truck today but I did get a chance to snap a few pictures showing off the LML mirrors also made some progress on the dumpster box
  11. cmmiller53

    RCSB LBZ Build

    Picked up some mirrors today and did some retrofitting, these are off of Hernpj01 old LML, took some custom trim work on the mounting surface and they fit pretty snug
  12. cmmiller53

    RCSB LBZ Build

    Got a box full of goodies today
  13. cmmiller53

    RCSB LBZ Build

    That would make sense, put on a spare tap shifter and fixed that problem to, must have been a bad wire, power windows still don't work even though this is the BCM out of the donor truck.
  14. cmmiller53

    RCSB LBZ Build

    I just test drove it with the different BCM and key, it didn't die on me, the theft light is flashing and the CEL is on, manual mode is acting up and only works when it wants to right now
  15. cmmiller53

    RCSB LBZ Build

    Full of electrical mysteries, I changed the column harness back to the original still with no luck, I ended up changing the BCM to see if that would change it, boom the lights shut off when they are supposed to, truck even started with the new BCM, out of curiosity I also changed the ignition so...
  16. cmmiller53

    RCSB LBZ Build

    Chasing my tail now since I changed the column harness, dash lights are staying illuminated all the time now, Manual Mode is also acting up and the truck won't engage in tow haul mode, only half the lights on the cluster are illuminating as well
  17. cmmiller53

    RCSB LBZ Build

    After a late night at work yesterday I finally made it to Hicksville to get a clock spring, went in for just that and came out with a whole new column and wheel[emoji85] so now I have 3, I got home and started the reassembly process and it went quicker than expected I've gutted a few trucks...
  18. cmmiller53

    RCSB LBZ Build

    Not sure what the plan is for it yet, haven't had time to mess with it yet, still haven't even checked all the drawers out, trying to rush to this last job so I can make it over to Hicksville auto recyclers to pick up a clock spring so I can put my puzzle back together
  19. cmmiller53

    RCSB LBZ Build

    Interesting, I dug even deeper into the truck last night so I could add the wire that I needed properly, double checked all my diagrams and it seems that I was only missing the one power wire, depending when I get off work today I'm going to try again on the computer but that doesn't look...
  20. cmmiller53

    RCSB LBZ Build

    Got the truck hooked up to the computer tonight and no luck, the BCM had no communication with the DDM. Unfortunately I didn't have the BCM out of the donor to try because I think that may have been part of the issue, but I came home and started looking into all the wiring diagrams and found I...
Top Bottom