So are there much differences between an S475 and a GTX42? I know the GT42 is extremely close in size to the S400 but how much do the GTXs differ?
Size differences on BorgWarner vs. Garrett
- Thread starter paint94979
- Start date
The gtx4202 is 76mm ball bearing oil and water cooled. The s475 is 75 mm and journal bearing oil cooled. The gtx is more expensive as well
Shit sorry bud I should have been more clear... I meant the physical size of the chargers ie length and width. Is the center section drastically larger or smaller GT vs. GTX?
The turbine will determine the cartridge size. At least on borgs
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
T4 S4s and gt42s are close enough they can be bolted in place of each other. The gtx is the same size to as far as I know.
Spec. chart is here Nick I can't read it on my work Computer
pretty sure they were the same last time I looked at them. http://www.turbobygarrett.com/turbobygarrett/turbocharger#GTX4202R
http://www.turbobygarrett.com/turbobygarrett/turbocharger#GT4202R
This is the t-4 s475
http://www.ebay.com/itm/Borg-Warner-Airwerks-S400SX3-75-T-4-S475-Turbocharger-/221252348679
Last edited: