Pacemakers Dragway 7-21-23

[PureHybrid]

We had a company night at the track, employees and family only. Made 5 passes in the truck, two best were 8.002 and 8.046. Not terrible for an all stock motor and turbo I guess. And I think I'm at the limits of what this 1056 converter will do, tried to launch it harder on one pass at about 20psi but the 60ft didn't improve. First run was vs a Chevy C10 with a big block, second was a newer Tesla. Don't ask what model because I have no idea, it was a 4dr and black.

Made two runs on the Harley, 8.40 and an 8.33

 

[PureHybrid]

And a props to Jason for the hotrod FICM never missed a beat

 

[JoshH]

Nice passes. Other than the trans and lift pump, do you have any other mods?

 

[PureHybrid]

An LMM cp3, intake has an LBZ inlet and the box / tube is from when Bills Custom Intakes was still around, PPE downpipe. Front end has Rare Parts tie rods and a DHD brace, I have DHD spring clamps that I threw on the front side of the leafs too. Engine has never been opened, 240k on it.

Well I should say I've never had it open, but it's been mine since early 2010 and it was 100% stock when I bought it. If it happened to have gaskets or something done the PO did a great job hiding it