I am trying to get my 500rw tune smokeless and Im using the maf limiting tables but there isnt enough resolution once my tune gets to the higher mm3 cells on the pulsewith table.
Ive tried commanding more boost but I never see any higher than about 30.2 actual boost on my logs. Is this the limit of reading? Is there any way you can scale the sensor to make it read higher? I don't have a mech boost gauge so I don't know what I am actually getting, but I would like to try to see if adding a couple psi would put me into the 2.4g/cyl cells of my maf limiting table giving me full fueling when ever I go above about 3000rpm.
Ive tried commanding more boost but I never see any higher than about 30.2 actual boost on my logs. Is this the limit of reading? Is there any way you can scale the sensor to make it read higher? I don't have a mech boost gauge so I don't know what I am actually getting, but I would like to try to see if adding a couple psi would put me into the 2.4g/cyl cells of my maf limiting table giving me full fueling when ever I go above about 3000rpm.