LBZ: boost tube boot

[blackdirtymax]

Hope this is in the right spot , move if need be. Anyways i ended the life of the driver's side intercooler boot . :roflmao: what are you guys using for replacements? i am slamming a 60 psi boost guage with no problem, so i would like to get a really good boot to put back here. Any ideas will be greatly appreciated.:thumb:

 

[JoshH]

This is what I used when I blew mine up last year. http://www.siliconehose.com/commerc...ree--10---legs--gloss-black--90b-300-x-10.htm

 

[blackdirtymax]

This is what I used when I blew mine up last year. http://www.siliconehose.com/commerc...ree--10---legs--gloss-black--90b-300-x-10.htm

what just cut it to fit ?

 

[JoshH]

Yep. You won't find a direct drop in other than stock. The other option is an AFE CAC tube or a custom made tube that allows you to use a straight boot.

 

[blackdirtymax]

Yep. You won't find a direct drop in other than stock. The other option is an AFE CAC tube or a custom made tube that allows you to use a straight boot.

ahhhh gotcha , thanks man just worried about buying a stock one , seems it might bust again

 

[sweetdiesel]

Stock is a good ply but expensive, I only run straight boots on my set up

What works well is running either duct tape or a larger hose over the stock hose