Recent content by 408.Luke

  1. 408.Luke

    lowered truck pics

    I would lift the truck up, loosen all 4 bolts, set it on the ground and then tighten them and see where it's at. You might be surprised the difference it makes
  2. 408.Luke

    lowered truck pics

    Did you tighten the shackles with the truck in the air?
  3. 408.Luke

    2014 Z/28 build date 5/19.

    Yeah sorry, I meant on the head, although it's not really thickness I don't think, just taller. Either way you can't bolt on a blower from a ls9/a let alone any normal LSx intake.
  4. 408.Luke

    lowered truck pics

    Thanks! The lca's are just to get my camber in check but the truck rides better now. I'm not sure if it's from the LCA's, new ball joints, the new poly sway bar mounts and end links, or just the fact it now actually has swaybar end link bushings but it now rides incredible.
  5. 408.Luke

    lowered truck pics

    Figured if was going back, might as well go all out! Thanks! It can be brutal! Wheels are Vision Fury 20X9 -12et which just came out. Tires are Nitto 420s' 305-50-20's. I also swapped to the DJM lower control arms and put in all new ball joints, inner and outer tie-rods, and some other...
  6. 408.Luke

    lowered truck pics

    Thanks! And mechanical engineering, I've got 2.5 years left
  7. 408.Luke

    2014 Z/28 build date 5/19.

    Congrats! They are awesome cars, by far my favorite Camaro thus far. The blower won't fit. LS7's are a lot different from LS9's and LSA's. Completely different heads and deck height. Plus unless they have fixed the issues from the old LS7's they don't tend to like boost to much.
  8. 408.Luke

    c4 vette and dodge hemi rc/sb

    Haha thats awesome! always love a good Mexico racing story haha I prefer the I-10 west, its a little nicer part of Mexico.
  9. 408.Luke

    lowered truck pics

    Made a few changes so I thought i would post some pics. Took these this morning up at school.
  10. 408.Luke

    Hey Ken, I got another one for your list!

    Congrats Josh! thats incredible!
  11. 408.Luke

    Those with coil overs

    It's going to take custom mounting points and not nesicarily a different shock and coil setup. Although a 10" or 12" spring on a 5" travel shock would be better for stock ride hight application. My setup works so well for me because it's so low and I'm going for more of a car style travel. Very...
  12. 408.Luke

    Those with coil overs

    whats wrong with yours/what do you need to have done to yours? I just swapped to the DJM arms without any problems. I know to low is one of your problems, you could get something like this to get extra hight out of the setup...
  13. 408.Luke

    Southern Texas

    That's kinda what I figured. 5 acres in Austin will be pricey unless you look out in Hutto or something but I have a friend with kids there and he's not to impressed with the schools. I grew up in Katy which has good schools (at that time anyway) but finding 5 acers will probably be a bit...
  14. 408.Luke

    Southern Texas

    Are you going to have a daily commute to Pleasanton? If so Houston and Austin area are probably going to be to far of a drive. It's a bit over 2hrs from Houston and almost the same from Austin, especialy if you moved to Round Rock. I personally don't like Austin much and cost of living is a lot...
  15. 408.Luke

    lowered truck pics

    I can do some trimming. Can i do enough to make them work though? Either way ill be running the same size tire so wouldn't i basically be in the same situation with the 20x9? I know its not quite the same thing due to the offsets and such but I've never been good about wheel sizes/fitment
See more
Top Bottom