Help: XD Hoss 18x9 Fitment

[steveman09]

Hey guys, I'm new to the forums and have been searching around for an answer with the search button but haven't really found any concrete threads on this but I have a 2004 Silverado 2500HD Duramax 4X4 Regency Crew Cab Short Box, to me it looks higher than usual, ive been told the regency's come with a leveling kit of sorts.

Anyways I'm about to purchase the XD Hoss 795 Series 18x9 wheel with a -12mm offset and wrap em with some 285-65-18 Nitto Trail Grappler tires.

Question is will it clear? or will I need to get a the +18offset instead? I like the wider stance personally. but this wheel only comes +18 or -12 offsets

I'm ok with some minor trimming, but I can't lift the truck much higher since I am going to be towing a 5th wheel.

Thanks in advance.

 

[BBankDmax]

i would say yes although im not familiar with offsets

 

[THEREDDEVIL]

U should b fine. They r 32.6x11.2. If u find out the front isn't leveled then u might have to do a very small amount of trimming.

 

[whitetrash21]

You'll probably need to trim the lower valance a bit but that should be it. I ran XD Hoss in 20x9 on mine with a -12 offset and 305/50 rubber.....that was with the truck lowered 2/3. Rubbed the rear of the fender well occasionally but only when the locked out and suspension compressed.

 

[steveman09]

thanks allot I appreciate the help!


Just ordered them, I will post some pics when I get em on.