LB7: With LBZ CP3

[ripmf666]

Ok when adding a LBZ CP3 to a LB7 motor I take it you use the LB7 reg in the LBZ pump or leave the one that comes in the LBZ?

 

[LarryJewell]

Jason (maxfarmer) has a LBZ regulator on his LB7

 

[Kat]

Jason (maxfarmer) has a LBZ regulator on his LB7

That is what I would do since the LBZ regulator is stronger

 

[2500HeavyDuty]

u can use all lbz pump on the motor, fuel line and fca connection will be the only problem.

and the other bugs u can tune out with efi

 

[onebadduramax]

everything worked fine on my lb7 but yes tuning is needed

 

[ZeroGravity58]

its easy i have a LBZ reg in mine..

 

[SDP]

Put an LBZ pump and reg in mine, all that was needed was a little tuning which was fairly easy to figure out.

 

[Rhall]

I have twin lmm pumps and regulators. Shes all good. When i ran lbz pumps, i used lb7 regulators with lbz plungers to keep the correct voltage, that was a couple years back though.

 

[TheBac]

Use the LBZ regs. The stock LB7 reg "dumbs down" the LBZ pump to LB7 levels. (see my thread in Hard Parts asking this very question)

 

[super diesel]

This thread is way old and there are options to this.