Widest 8lug rims, who makes them

[RPM Motorsports]

The widest 8lug rim I have found is 10". Does anybody know of a company that makes a 14"-15" wide 16" rim? It would be great to find one with an outer bead lock as well. I might end up putting 9" axle ends and different brakes, to convert to 5 lug. Thats a last resort though.

 

[paint94979]

The widest 8lug rim I have found is 10". Does anybody know of a company that makes a 14"-15" wide 16" rim? It would be great to find one with an outer bead lock as well. I might end up putting 9" axle ends and different brakes, to convert to 5 lug. Thats a last resort though.

PM Chris Russ, he should be able to help you

 

[RPM Motorsports]

Chris???

 

[paint94979]

Chris???

The neens he had wide slicks mounted on wide wheels that he used on his dads dually when he raced. Not sure of the size.

 

[RPM Motorsports]

That Chris, thought you meant somebody around here!

 

[03maxpower]

you can have them made as wide as you want i forget the company though you should be able to do a search and find out

 

[03maxpower]

found the site mrt-wheels.com

 

[Noreaster]

Mickey Thompson makes 16x12s

 

[S Phinney]

Mickey Thompson and Weld wheels are two that make wider wheels. I know they make 12's and Weld may make bigger.

 

[malibu795]

Mickey Thompson makes 16x12s

Mickey Thompson and Weld wheels are two that make wider wheels. I know they make 12's and Weld may make bigger.

dick cepek can also be had in 12" wide as well

 

[Noreaster]

MT & DC are the same company

Weld isn't making truck wheels currently

 

[Turbo Performance]

The widest 8lug rim I have found is 10". Does anybody know of a company that makes a 14"-15" wide 16" rim? It would be great to find one with an outer bead lock as well. I might end up putting 9" axle ends and different brakes, to convert to 5 lug. Thats a last resort though.

Try this. http://www.holeshotwheels.com/index.cfm Call them. IIRC they were pretty reasonable priced and could build just about anything you want.

 

[JoshH]

There is a company called Stazworks that is big in the offroad world. They make custom double beadlock wheels that bolt together like a HMMWV wheel. I think they make all their wheels out of steel, so they would be heavy. They're also pretty pricey, but here's their website: http://www.stazworks.com/index.html

 

[Kat]

MRW in Tenn. iirc. Will make anything you want also they are steel but they where pretty cheap for LSR rims we had made for Casper

 

[RPM Motorsports]

Thanks guy's the minimum width I can use with the tire is 14". I'll look into the other companys.

 

[JoshH]

Thanks guy's the minimum width I can use with the tire is 14". I'll look into the other companys.

I saw a 16" available from Stazworks.

 

[MadMaxx61]

I saw a 16" available from Stazworks.

X2 they make them up to 20" wide

 

[RPM Motorsports]

Just saw that, $436 for a 16x14 is not too bad. I wonder how they would hold up to some sticky tires? They might not be balanced that well either!

 

[JoshH]

Just saw that, $436 for a 16x14 is not too bad. I wonder how they would hold up to some sticky tires? They might not be balanced that well either!

They're designed for big heavy tires and heavy offroad abuse. I'm sure strength won't be an issue. I think weight and balance would be your biggest concern.

 

[RPM Motorsports]

Will a 5 lug hub from XX year truck interchange with the 07 8 lug hub? Looks like the rear is going 5 lug. Rim selection is much better!