Who's truck is this?

DIESELMAFIAPER.LB7

<----new hotness
Jan 17, 2010
5,163
12
38
idaho
shop.dieselmafiaperformance.com
Lol ask rob or ken about the 4.10 gears they had in the front of Max'D Out and the 3.73s in the back. he didnt purposly try it that way as he thought they were 3.73s in the front chunk. Rob said the truck was bouncing the front end so hard he thought the whole front end was coming off the ground :rofl:.

Ya i watched it hop all the way down the 1/8 the that way :eek:
 

GMC_2002_Dmax

The Still Master
Its Tim Burchette, NC truck, I tuned it two years ago IIRC, he swapped the drive train into a 2003 RC from a 2002 RC because the 2002 had a lift and it wasn't worth pulling it out.

That track looks like Mooresville, NC.

Spent lots of time there the last few years, NC, and GA........;)

I'll be tweaking it in December along with a bunch of other NC, SC,GA trucks.

If you think the video is cool you should be riding in the passenger seat with a Road Runner ECM hooked up making Bonzai runs.........:woott:
 

MACKIN

Smell My Finger...
Aug 14, 2006
3,948
1
0
Connecticut
Its Tim Burchette, NC truck, I tuned it two years ago IIRC, he swapped the drive train into a 2003 RC from a 2002 RC because the 2002 had a lift and it wasn't worth pulling it out.

That track looks like Mooresville, NC.

Spent lots of time there the last few years, NC, and GA........;)

I'll be tweaking it in December along with a bunch of other NC, SC,GA trucks.

If you think the video is cool you should be riding in the passenger seat with a Road Runner ECM hooked up making Bonzai runs.........:woott:


I don't know for sure but does your trip and tweaking trucks down south means that you ARE tweaking Bucks truck to see if there is anything left on the table? Well so says the buzzing in the sewing circle. :eek:
 

GMC_2002_Dmax

The Still Master
I don't know for sure but does your trip and tweaking trucks down south means that you ARE tweaking Bucks truck to see if there is anything left on the table? Well so says the buzzing in the sewing circle. :eek:

Uhmmm, NO.

I have never met Buck or Jess, and to my knowledge they are happy with the Soup,

However, I am sure there is room on that table for a little "Shine".

;)
 

05chevy

Active member
Jun 10, 2010
1,086
0
36
i wonder what trans he is running? and i think buck's truck was tuned by johnboy. could have been told wrong sorry if i stepped on feet. that is a wild truck tho. would like to know some specs on it
 

SmokeShow

Well-known member
Nov 30, 2006
6,818
34
48
43
Lawrenceburg, KY
There sure are some folks on the interwebs that are assholes for no good reason. Quite discouraging & disappointing at times. IMO, ol boy kept his cool better than I might have. I'd prolly have walked out with a FU & not returned. No sense in that stuff.
 

Subman

Old Geezer
Jun 27, 2008
3,233
10
38
80
Madras, OR, Pahrump NV

don't understand this post at all. What does that thread have to do with this one? As far as who tunes Buck's truck, it's still Steve Cole from TTS unless there has been some drastic change. The truck in this thread is a sweet looking truck, 6.7 in the 1/8 mile makes it a high to mid 10 sec 1/4 mile truck which is pretty sweet for a street truck. Needs more air or better tuning though to clean up the smoke, shouldn't smoke at all after he get on top of the turbos.
 

Whitetail Addict

Rockin' the stock tune
May 8, 2008
2,350
0
0
South Central Pennsylvania
don't understand this post at all. What does that thread have to do with this one? As far as who tunes Buck's truck, it's still Steve Cole from TTS unless there has been some drastic change. The truck in this thread is a sweet looking truck, 6.7 in the 1/8 mile makes it a high to mid 10 sec 1/4 mile truck which is pretty sweet for a street truck. Needs more air or better tuning though to clean up the smoke, shouldn't smoke at all after he get on top of the turbos.

C'mon Ken :D

Last post on page 3 and onto page 4 ;)

Post 28 on this thread pointed out the soup.