I'm looking for some body panel clips like these. The way they work is you insert them with the center part out, push the center part so it is flush with the head to lock it in place, and push it in further than the head to release them. They're kind of like the stock retainer pin clip things that hold in the wheel well liners, but they're easier to get out. I found them on a website, but there is a minimum $100 order. It is manufactured by TWFastex, part number 1R56 A 9 061 02. I did a search on Google, but came up empty handed. Anyone know where I can get some? Here's a quote from the information on the site where I found them and a picture.
Where can I find these clips?
- Thread starter JoshH
- Start date
trying to remeber. there's an import with them. I think porsche and audi has them. Maybe BMW. I'll ask around tomorrow.
they have differnt sizes of them a few of them in fact i tryed other ones from diff things and didnt work.( on innerfender wells)
try a honda suzuki or yamaha dealer. most sport bikes have atleast a few of these holding some panels together
http://www.auto-plastic-clips.com/product/Plastic fastener to different car_2.htm
This one looks to be the same but I dont know what size you are looking for.
they call it Chrysler car fastener c425 so I am sure any Chrysler dealer will have it.
This one looks to be the same but I dont know what size you are looking for.
they call it Chrysler car fastener c425 so I am sure any Chrysler dealer will have it.
Last edited:
I would chip in on a group buy as long as they fit the fender liners and the plastic cover above the grill ? I loose them way too often and hate pulling the OEM ones :baby:
The ones that I've seen at the chain stores are all like the factory clips in that you have to pull the center section out to release them. Josh is looking for ones that you can push it below flush to release it. I have some from AutoZone holding my license plate on that are the pull-out type - but they are much easier to remove than the stock ones.
i got some for my firebird once at Autozone that had a slit on top for a flat blade screwdriver. they looked like the factory ones, but when you wanted to remove them, you unscrewed them to get it out. i haven't looked for them in years, so i don't know if they still have them or not.
Those clips are used on Suzuki motorcycles.....if you want to check one for sizing, go to a dealer and ask to see part number 09409-07333. They are pricey, though- 2 bucks each.