When I pull my wheels keep towing in bad. I have cognito tie rods and Ppe brace kit with the torsion bars all the way down. What could I do to stop this? Any info would help!
Wheels keep towing in
- Thread starter dbev24
- Start date
Make sure all of your steering componets are still good. I've had good luck with tonys steering brace.:thumb:
No lift or leveling keys just stock, and idk how to post pics but the angles on the cv's are negative.
Youve got some worn out steering parts if you're still toeing that bad. Id look at a straight centerlink or Tony's brace to help.
It doesn't matter how the truck sits when not going down the track. What does it look like going down the track? Guessing the front of the truck picks up a lot once you take off and that is what is causing the front tires to toe in. Or like said above, the parts are worn out.
Did u check the idler arm mount brace that bolts to the frame of the truck it could be bent, i welded a bracket from my frame on to idler arm mount to keep it from bending
Well after looking at it idler arm is just starting to get bad but looking at the centerlink it looks bent to me. So I ordered a straight link and am goin to put a new idler arm on. If this doesn't finally fix it then I might burn my truck lol
Check your toe in at the height the truck is going down the track. If it is not right you will still toe in. Even with a straight center link and Tony's brace. I have them both on my truck and it still toed in. Had to do a little better line up job than just looking at it
I don't see you listing sleeves anywhere but the SCL and sleeves will stop all roll of the CL.
Sent from my iPhone 4S
Sent from my iPhone 4S