I know I post a lot but I made my mind and bought a s300/400 twin kit will be using my t4 double bat 366 can't decide 80 or 83 and which wheel to put in
What turbo for my 66
- Thread starter blue09dmaxx
- Start date
How much cash are you wanting to spend? I would go with the bullseye S483 if cash didn't matter, or if your cheaper like me, just a standard S480 with a cast wheel and standard cover. I am not sure how much HP your trying for, but it is a lot cheap to make a plan and build the plan.
I agree, it'll leave you with more room to grow than the 80 with basically no real down side.
66/80 will get you deeep in the 900+ range with dual c's and @ minimum 50% sticks. The Catamax is running this combo and has dyno'd multiple times 960+. He is standard cast wheels in both chargers.
mid 11s I think its a cclb truck he was having trouble spooling last I seen it something in the tuning I belive
The difference in spool up was noticeable for me change the wheel from cast to batmo in my 480, I would recommend it in with the 80 or 83 that you choose.
Talk to mark about the batmo in your 366 if you haven't done so already. You might not want to do that wheel in the s300
Talk to mark about the batmo in your 366 if you haven't done so already. You might not want to do that wheel in the s300
My understanding is your money is better spent with the batmo being in the atmosphere charger because it responds so well at lower shaft speeds where as you will be driving the hell out of that 366.