What is next to fail? ~600hp

[SSchmi5519]

I'm sitting around 600hp and I'm sure my rods are feeling a little shorter now than they were in the past.

If I added only a set of rods (Crower, Carrillo, Howards, etc), what is next on the list to fail?

I shift at 3600rpm.


Current relevant mods:

EFI
SC IV
S472 (.9AR)

 

[hondarider552]

Your ujoint :spit:

 

[jmaz268]

I would have to say gaskets or plain lifting a head....but it really could be anything.

 

[SSchmi5519]

Your ujoint :spit:

If I don't get those traction bars on soon, you are right!

I would have to say gaskets or plain lifting a head....but it really could be anything.

Gaskets are not an issue.

 

[Jscherbs]

i dont know what would fail next but i hope more fuel is on the menu

 

[hondarider552]

Stich weld head to block. :rofl:

 

[SSchmi5519]

Stich weld head to block. :rofl:

Check.

 

[SSchmi5519]

i dont know what would fail next but i hope more fuel is on the menu

On the menu? More like on the UPS truck. :woott:

 

[paint94979]

You are a freaking pansy Steve

 

[KEVINL]

You are a freaking pansy Steve

:roflmao:

What is your hp goal.

 

[Chevy1925]

On the menu? More like on the UPS truck. :woott:

i call BS. tracking number please . Im gunna say your front diff cause i know you still aint fixed it

 

[SSchmi5519]

i call BS. tracking number please . Im gunna say your front diff cause i know you still aint fixed it

1ZY868F2035353xxxx

:cool2:

:roflmao:

What is your hp goal.

I know what I should do, I'm just wondering what fails after rods.

You are a freaking pansy Steve

:nana3:

 

[hondarider552]

:spit::rofl::rofl:

 

[KEVINL]

Rods and Headstuds is what worries me.

 

[Jscherbs]

i would say lifting the heads due to the standard compression of the pistons. unless u already have studs n gaskets.

 

[Chevy1925]

1ZY868F20353538741

:cool2:

its now been re-directed to my place for drop off. Thanks steve! i knew you were a good friend :hug: :rofl:

 

[SSchmi5519]

 

[paint94979]

Steve don't be scared... detorque it man why won't you listen to me ?

 

[SSchmi5519]

Steve don't be scared... detorque it man why won't you listen to me ?

Yes, high RPM keeps stock rods alive longer, but puts the valvetrain, balancer, water pump, and other components through hell.

I shift at 3300, and make peak power at 2900.

 

[gmduramax]

The pin on the cam gear.