What is exactly is this?

[TNRGreene]

What is the benefit if any?

Ported Fuel Rail Fitting for LLY 04.5 - 05

 

[duramaxin14]

Todd i have it on my truck. I bought the ppe one and screwed the threads up. So i modded my stock one. Its very easy to do your stock one. If u need to no how drop me a line

 

[walsh450mx21]

that doesnt tell him how it benifits him or wtf it does that just tells me even more u aint workin on my truck.. just paul i aint read about him messing anything up yet..

 

[02freighttrain]

Boar them litle hoe's out. Not two much. so the pypes well steele sill up.

 

[sweetdiesel]

Boar them litle hoe's out. Not two much. so the pypes well steele sill up.

 

[The Neens]

Boar them litle hoe's out. Not two much. so the pypes well steele sill up.

perfactly sayed

 

[JoshH]

Boar them litle hoe's out. Not two much. so the pypes well steele sill up.

Rough night? :rofl:

 

[Mike]

Boar them litle hoe's out. Not two much. so the pypes well steele sill up.

Scratching heads?????

 

[Dan@PPE]

It will allow more volume into the rails quicker. Remember the 04.5-08 trucks flow fuel from the cp3 from one rail to the other (lb7's are off a t-block) So this is very important mod. Drill the stock fitting out to about .090"

 

[TNRGreene]

So this is very important mod. Drill the stock fitting out to about .090"

Where exactly is the stock fitting? I know where I put the race valve but don't remember this other one. How hard is it to do?
Thanks

 

[Dan@PPE]

Same spot on the front of the drivers fuel rail, its the fitting that is threaded into the rail and has the main fuel line into it.


Dan

 

[TNRGreene]

Same spot on the front of the drivers fuel rail, its the fitting that is threaded into the rail and has the main fuel line into it.


Dan

I spotted it, Thanks

 

[duramaxin14]

that doesnt tell him how it benifits him or wtf it does that just tells me even more u aint workin on my truck.. just paul i aint read about him messing anything up yet..

Tyler this is funny as hell. I didnt no how it benefited all i know as we have it done to snowflake And the other 04.5 we have been working on. It was pauls idea to drill the hole so danm big. U wouldnt want him working on your truck without him playing geniue pig on his first.:cool2:

 

[dmax tim]

Drill the stock fitting out to about .090"

so's i ass u me dats close 2 quarter ench? :rofl:





why does people use big numbers like that?



how do u measure .090" (?) w/ a yard stick?

 

[TNRGreene]

I don't have a bit between a 5/64 & 3/32. or am I missing something?

 

[dmax tim]

I am missing something?

number drills

#44= .086"

#43= .089"

or metric

2.250mm= .0886"

 

[TNRGreene]

Thanks

 

[TNRGreene]

The hole in it already is a .116 or 32?

 

[duramaxin14]

So todd did u do it yet??

 

[TNRGreene]

I'll never tell