What fuel line to use?

[Chevy1925]

So i noticed the other day the blue air dog II lines used to connect the air dog up are starting to split pretty darn deep. I dont need one of these completely splitting so what kind of line are you guys using and where are you gettin it? I have extra hose from when i installed the kit but only getting a 1.5 years of life out of the hose isnt god enough imop.

 

[05chevy]

I use 1/2" line from napa. Been holding up for years now

 

[Chevy1925]

What kind? Just regular high pressure fuel line?

 

[adeso]

Noticed my AD lines were doing that also. I might just pay up and go with the SS stuff (if I want to make it legal per NHRA). IDK if they check for that stuff at NHRDA events or not

 

[gmduramax]

I use 1/2" line from napa. Been holding up for years now

X2 I just asked for fuel line rated for diesel

 

[delong_1]

We use Parker push lock hose. Decent price and never had any problems

 

[Chevy1925]

Thanks guys. Ill be headin to napa

 

[pizza pig]

We use Parker push lock hose. Decent price and never had any problems

this is all I use, works great.

 

[TeaBagger2006]

ive had that pushlock blue hose on my lift pump for years. must be that az air

 

[Houser04lly]

Mine are also doing the same I am glad I am not the only one with this issue.

 

[Chevy1925]

We use Parker push lock hose. Decent price and never had any problems

this is all I use, works great.

where do you guys get that stuff?

 

[TeaBagger2006]

Usually any hydraulic hose place carries Parker stuff, that's where I bought mine.

 

[Sledheadxp800r]

Summit and jegs sell Parker push-lok hose. I bought a couple miles of it last week.

 

[Chevy1925]

Next question is what size hose does the ADII use for all its connections? and for a push lok, do they go off I.D. or O.D.

 

[Sledheadxp800r]

Should be 1/2" hose -8 AN

 

[Noreaster]

1/2" for the supply & 1/4" for the return

 

[TeaBagger2006]

Inside diameter 1/2"

 

[DIESELMAFIAPER.LB7]

My fass hose is kust starting to crack after 4 years think ill redue it to and run 1/2" the whole way to the pumps and do some new stuff and get rid of the factory stuff and clean the engine up

 

[Chevy1925]

thanks guys, appreciate it

yeah Jake, i have 5/8ths hose from the pick up of my PPE pickup all the way to the 1/2 connection of the ADII. that shouldnt ever give me any problems with fuel volume at my power

 

[DIESELMAFIAPER.LB7]

Nah think you need 3/4"