Before we tuned it, 484/483. After we tuned it 529/564. We left 20+HP on the table, the owner wanted an extremely conservative tune.
What did you do at work today?
- Thread starter six5creed
- Start date
Before we tuned it, 484/483. After we tuned it 529/564. We left 20+HP on the table, the owner wanted an extremely conservative tune.
Nice! We've put in over 60 bids for rigs coming out of the weeds, glad your getting back out there man! That's good news!
Making that old two stroke Detroit sing
Sent from my iPhone using Tapatalk
Buddy of mine has a 6v-53 in his mud truck god that thing sounds good
working on some gun mounts that you can use either a Mongolian PKM or a Czech 249
Got in this morning and they needed 2 spindle but sockets made in a hurry so I threw these together and the boys I work with "nationals" welded them before I could cut out the 3/4 for the ratchet. It's only 8am and already in the 80's today's gonna be a hot one.
We have guys around my work that do this routinly. Mostly auto dismantlers hauling vehicles. Ripping up and down the street carrying cars. Guess thay dont want to take a nose dive if they have to slam on the breaks.
Some of the guys have what looks to be factory weights sitting on the rear. Cast steel and color matched, etc
Fastest engine to 60hz there is, if you don't set the governor right it'll trip the air cutoff every time, emissions is killing off these old dinosaurs
That one will be coming out in a couple years and making its way to my junk collection, I've got 4-4bt 2-6bt and a hino, no clue what to do with them yet
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
we have a 5k 1986 nissan forklift at our shop, the pallets of sand we haul in are 3k each pallet. i like double stacking them and riding reverse wheelies with the fork lift :roflmao:. just needs turning brakes so i can turn while in a wheelie
Get a picture next time, I want to see it!!!
The forklifts these weights are going on are pretty large forklifts. That's why we told them they needed a bigger forklift. They have two big ones and are gonna switch these weights back and forth depending which one goes out on the job. They said they have another, larger forklift they want to add 4,000 lbs. to, we'll see. What gets me is they are putting all this weight on a 1 1/2" pin with the 4 pieces holding it all together. I don't trust the pin.
Greg needing some heavier jackstands for his rail??
Said jackstands.... For stamping press
Different load... The round cylinder is 1,200 ton hyd Jack
Boring computer stuff. Converting our access control, alarm, fire alarm software to a newer version of the software. Not a direct upgrade but a data migration. A lot of typing and copy/pasting to get everything switched over.