I'm looking for these or something similar. Usage is for aftermarket: Fog lamps, LED, and driving lights.
Anyone..??
thanx,
stk
Anyone..??
thanx,
stk
Waterproof Connectors..Where to buy.??
- Thread starter steakman
- Start date
You can buy them from your local Cat Dealership. If you tell me what configuration of connector you want I can get you a part number.
If you have a Gregg's distributors around there they might have something that would work for you. A weatherpack connector is probably the cheapest and best way to go. Or check any of the heavy truck shops or construction equipment dealers like Travis said. They will also be able to help you out.
If I was at home I would just run to EECOLE electric for you and send you what you need.
If I was at home I would just run to EECOLE electric for you and send you what you need.
Cougar, thats a pretty good website. Actually I found a truck parts distributor/Garage here that actually ahd some Delphi connectors in stock no less.! Set of 10 - 2pole with all the pins, end seals etc for 60.00 CAD. not bad I figure. Just wish it were spring/summer..too damned cold to be soldering pigtails on while lying on your back on concrete with only some carboard between you n the floor. Decided to use my heat guns (2) and blow me some hot air to keep the hands in movable condition.! whatever works right.?
anyway, here are those connectors..
Geez, If I was still living in Calgary..Greggs on 52nd St X 61 St ave SE..?? And Eccol electric..yea remember them too in Calgay.. Manhatten Rd I think..near that steel distributor shop.. Yea lots of p-laces there to get electrical stuff.!:thumb:
Stkman misses the Cdn west...where normalcy/common sense is predominant. He finds the East is simply too Socialist/Tree Hugger and full of rampantly stupid people for his liking. I shall Return.!
thanx,
anyway, here are those connectors..
Geez, If I was still living in Calgary..Greggs on 52nd St X 61 St ave SE..?? And Eccol electric..yea remember them too in Calgay.. Manhatten Rd I think..near that steel distributor shop.. Yea lots of p-laces there to get electrical stuff.!:thumb:
Stkman misses the Cdn west...where normalcy/common sense is predominant. He finds the East is simply too Socialist/Tree Hugger and full of rampantly stupid people for his liking. I shall Return.!
thanx,
Last edited:
Ya we have it pretty good out here. It blew my mind that when I was in the states and even out in eastern canada if I wanted a metric bolt I either had to go to the dealer or a hardware store!:screwy: Insane. 10 min from my house I can go to 5 different places and buy everything from metric stainless bolts to any threaded stud you can think of!! Same goes for fittings and hose.
Gotta love the oilfield!!
Ya we have it pretty good out here. It blew my mind that when I was in the states and even out in eastern canada if I wanted a metric bolt I either had to go to the dealer or a hardware store!:screwy: Insane. 10 min from my house I can go to 5 different places and buy everything from metric stainless bolts to any threaded stud you can think of!! Same goes for fittings and hose.
Gotta love the oilfield!!
That would be nice, metric is about all i deal with now days unless im working on somthing older and domestic and thats not often. Only SAE tools i have at work are a 1/4in wrench and socket for hose clamps:rofl:
Actaully, that connector is the exact style we got.
Cougar, thats a pretty good website. Actually I found a truck parts distributor/Garage here that actually ahd some Delphi connectors in stock no less.! Set of 10 - 2pole with all the pins, end seals etc for 60.00 CAD. not bad I figure. Just wish it were spring/summer..too damned cold to be soldering pigtails on while lying on your back on concrete with only some carboard between you n the floor. Decided to use my heat guns (2) and blow me some hot air to keep the hands in movable condition.! whatever works right.?
anyway, here are those connectors..
Geez, If I was still living in Calgary..Greggs on 52nd St X 61 St ave SE..?? And Eccol electric..yea remember them too in Calgay.. Manhatten Rd I think..near that steel distributor shop.. Yea lots of p-laces there to get electrical stuff.!:thumb:
Stkman misses the Cdn west...where normalcy/common sense is predominant. He finds the East is simply too Socialist/Tree Hugger and full of rampantly stupid people for his liking. I shall Return.!
thanx,
Vrabel..they were the first place is found. Route 66 Supply in Holister, Ca...right.? Tried that night to buy online, their website did not work. E-mailed them - no answer. Tried calling them after looking up their number on 411. Called once, left a message, Called 3 times after that. Zero Response. F*** em .. I figured.! LOL
I mean really now, I just don't have time for that bs when I' m looking for product. It's as simple as that. As it ended up being, I found what I needed right here at home amazingly enough.!! But ya know, my first instinct was to buy online. And had they responded, I would have bought and still be waiting for the product..!
BTW that pic is from their website..likely the last thing left of their business. LEsson here is I think I will look in town first, if its too pricey then look on line.
Thanx,
Stk
I mean really now, I just don't have time for that bs when I' m looking for product. It's as simple as that. As it ended up being, I found what I needed right here at home amazingly enough.!! But ya know, my first instinct was to buy online. And had they responded, I would have bought and still be waiting for the product..!
BTW that pic is from their website..likely the last thing left of their business. LEsson here is I think I will look in town first, if its too pricey then look on line.
Thanx,
Stk
Duetz(spelling??) Engine uses the same connectors I believe. Your local Bobcat dealership should have those in the service department. No special tools needed as the pins come on 6" leads and just snap into place. I use them for everything on my truck and sure makes a job look more professional and gives you a piece of mind.
Summit Racing has the connectors. Most configurations that you could need. Not too bad on pricing, and quick shipping. That is where I got the 2 I needed for my EGT probe.
We stock the 2, 3, and 4 pin weatherpack and all the cable seals, terminals etc..
Give us a call at the shop and tell Jeff or I what you are looking for. We have both the male and female's.
Give us a call at the shop and tell Jeff or I what you are looking for. We have both the male and female's.
Last edited: