I have a stock suspension and ride height. I have a friend with H1 hummer rims and tires. They are 37x12.5x16.5 e range. What will I have to do to run these? Leveling kit? Lift? Not even bother?
LBZ: Want to run H1 rims and tires
- Thread starter dieselmike247
- Start date
The rims would work but you'll need 7+ inch lift to clear a 37" tire.
Sent from my XT907 using Tapatalk 2
Sent from my XT907 using Tapatalk 2
get the wheels and ditch the tires, stock you can run 285s but small trimming will have to be done and it will rub a little
you will also need spacers to push the wheel out far enough so it will not rub the control arms. and i would venture to guess with the backspacing these wheels already have if you keep them closer to the inside you could get away with a 4" lift with the 37's
i just put h2 wheels on.. and the center caps wont go with the lugs i have.. im thinkin the stock center caps?
H1s are steel wheels anyways i run the H2s with 315 70 17s with the bars leveled and the inner fenders trimed with no problems.I believe the 315s are = to 33s thats the best your gonna getunless you do a lift.
A 315 70 17 is much closer to a 35 than 33 scott. Think last time i looked at a 315 70 17 bfg all terrain it was like 34.5" tall new.