VS built 7.3

NinjaMax

NinjaMax

WTF!
Oct 3, 2012
1,266
0
36
42
Severance, Colorado
My truck..epr S475/stock..ATS trans, fass 150, 4:56 gears on 37's, kryptonite stg 3, cognito bars and braces

Vs

2002 EC/SB 4" lift on 35's. He's got a pretty healthy list of mods..I know he's having a little trouble lighting her up but here it is
130 over injectors, powermaxx gtp 38 r Garrett ball bearing 88mm turbo, decked the heads, ceramic coated pistons, ts performance matched chip to injectors and turbo, 4 in exhaust, bigger intake valves and heaver Springs
 
bigjake18

bigjake18

Member
Apr 2, 2013
85
0
6
college station, tx
7.3s are still slow. He has a lot more weight than you. Don't spool up just ease into it till you know you won't spin and hammer it. Soon as your turbos light you'll pull away:D
 
TLyons90

TLyons90

New member
Apr 22, 2013
1,631
0
0
Greenville, SC
Like everyone is saying you should take the cake! If you cant run him in 4wd just tell him a 2wd roll race from about a 30 and if he is having trouble lighting up his setup you will have no problem what so ever pulling on him from a roll!
 
BLACKMAX1

BLACKMAX1

WAY2EVL
Jul 10, 2013
555
6
18
VA beach
Yea from a roll would be sweet, you can hold the brakes a bit to bring your rpm up but shouldnt have too. You'll have no problem beating him. Take a video :thumb:
 
Ne-max

Ne-max

I like turtles
Nov 15, 2011
3,361
64
48
Lincoln, Ne
A 38r turbo spools faster then a stock 7.3 one. They are good to the 500-550 range. I have never heard of 130 over injectors. Most guys go by cc's and nozzle percentage. Either way he dont have a chance.
 
coker6303

coker6303

Keep Calm and Chive On!!
Aug 6, 2009
2,484
0
36
40
Houston, TX
From a roll is fun if you have a lockup box... Little brake boost to spool her up and as soon as you nail to go it the box will lock and "she gone"!! :woott::D

You have to make sure to manually put it in a lower gear so it does fall under the power curve when the lock up box locks. Just depends on the mph/gear.

Not sure if this is frowned upon or not but it flat scoots! The boys down here with manuals always want to run from a roll.
 
NinjaMax

NinjaMax

WTF!
Oct 3, 2012
1,266
0
36
42
Severance, Colorado
Ne-max said:
A 38r turbo spools faster then a stock 7.3 one. They are good to the 500-550 range. I have never heard of 130 over injectors. Most guys go by cc's and nozzle percentage. Either way he dont have a chance.
Click to expand...

Yea no idea..that's a copy paste from his text...looks like as soon as the roads clear up its go time:D been months of shit talking leading up to this. :woott:
 
Jackblack99

Jackblack99

New member
Oct 18, 2012
270
0
0
Nowhere
NinjaMax said:
Yea no idea..that's a copy paste from his text...looks like as soon as the roads clear up its go time:D been months of shit talking leading up to this. :woott:
Click to expand...

He clearly doesnt know the mods to his own truck. Like stated above ford injectors are rated in cc's the nozzles are % over stock. Like my old 7.3 had 250/100's. 250cc's more than stock and 100% larger than stock nozzles. And a 38r is t an 88mm!!! My truck also had a 38r... Its a 66mm inducer. The exducer of the comp wheel is 88mm
 
Ne-max

Ne-max

I like turtles
Nov 15, 2011
3,361
64
48
Lincoln, Ne
Jackblack99 said:
He clearly doesnt know the mods to his own truck. Like stated above ford injectors are rated in cc's the nozzles are % over stock. Like my old 7.3 had 250/100's. 250cc's more than stock and 100% larger than stock nozzles. And a 38r is t an 88mm!!! My truck also had a 38r... Its a 66mm inducer. The exducer of the comp wheel is 88mm
Click to expand...

Not to mention over sized intake valves.
 
You must log in or register to reply here.
Top Bottom