Vibrant HD Clamp Jig

[Bdsankey]

I've seen around where a jig was referenced to set up proper spacing on Vibrant HD clamps during the fabrication stage, if that is a thing where can I get buy a 3" jig? I've tried many different google searches etc and can't find anything.

These are the clamps in question.



https://vibrantperformance.com/cata...=3405&osCsid=cd128ad77e0c7d08aca0f5c1bc6b0518

 

[kidturbo]

Saw that also, but didn't use one. Just clamped it up where both collars were touching the clamp and tach welded.

I'll be the first to say that I was very skeptical. My alignment is awful. But even though, have tortured them pretty good last couple months and haven't blown one apart yet.

Sent from a reclined position using Tapatalk

 

[Bdsankey]

Saw that also, but didn't use one. Just clamped it up where both collars were touching the clamp and tach welded.

I'll be the first to say that I was very skeptical. My alignment is awful. But even though, have tortured them pretty good last couple months and haven't blown one apart yet.

Sent from a reclined position using Tapatalk

I've seen nothing but stellar results which makes me happy. I'm going to be using them on my triple setup to eliminate all but a few boots (outlet of the S300s and the air intake of the S300s) and I just want to make sure I set them up the best I can.

 

[duramaxzak]

Putting Vibrant HD clamps on my intercooler connections is on my to do list for next winter.... should have did it last winter!

 

[duramaxzak]

VANJIG fab tool

this tool is designed to hold the flanges at the perfect spacing to get the full range of travel. when this tool is used you will actually get more flex out of your vanjen/wiggins style pipe couplers than you do with silicone couplers and hose clamps. Ive personally had a hard time selling...

subietuner.com

 

[MarkBroviak]

Hands down the best way to go on anything that makes more than 40psi boost and any heat where boots don't like to live long lives!

 

[Bdsankey]

Hands down the best way to go on anything that makes more than 40psi boost and any heat where boots don't like to live long lives!

That’s the thought exactly! The S300s should be no problem for a high quality boot at 30-50psi max. I didn’t want to overheat the boots and keep blowing them. I wanted more movement than v-band without using bellows.