Upgrading stock rear axle for pulling...

[JakeBrakeIH]

I still drive my truck on the street so I do not want to use a spool but I would like to upgrade my axles and carrier. What axles are a good direct replacement? SCS? Also what about a carrier, trutrac? detroit locker?? I personally had good luck before with my half ton with a turbo on it with the trutrac but thats a shadow of what Im doing with my duramax. Our tracks are not super tight up here but I just would like to have my ducks in a row prior to a failure. What is everyones opinion?

 

[vern]

Randys ring and pinion sells 38 spline axles and carrier for these, you have to drill the spindle for the larger axle .

 

[Kutchey2]

All seasons has lots of Experiance with this. I'd give them a shout

 

[juddski88]

I like my Grizzly locker and Branik Motorsports 300M axles:thumb:

 

[boominator]

Second on the all seasons
Shop number is 989 479 0444 if you want to give them a shout

 

[Schwinn68]

I had good luck running moser stock spline upgrades. I was going to run the "posi" out of the dodge Aam but never got around to it. The mosers are a lot beefier than the stockers and didn't twist or break even when I rotated the housing and snapped the drive shaft and rear yoke.

 

[Harbin_22]

Do the moser's have the hub deal like scs? That's the thing that keeps me from the scs OS I can't use my center caps

 

[x MadMAX DIESEL]

Do the moser's have the hub deal like scs? That's the thing that keeps me from the scs OS I can't use my center caps

How needs center caps when they look that good?

Sent from my PC36100 using Tapatalk

 

[Harbin_22]

I don't care for how they look on DD truck. Puller/drag yeah go for it they stick out way to far for me

 

[Schwinn68]

the mosers have stock style centers and fit under center caps

 

[Harbin_22]

Got a part number for the mosers? Care to share a price

 

[Schwinn68]

I'll dig up my invoice tonight and pm the price. These are in no way as strong as the Axles tony sells. They have done me well and were a nice affordable upgrade at my power level. Like anything, enough horsepower weight and traction will break them

 

[JakeBrakeIH]

Wow guess there are quiet a few options...guess I have some shopping to do to see what is going to be the best and most cost effective(and also considering I still drive on the street as well). Thank you for all the reply's!

 

[Sledheadxp800r]

I Put a stock spline grizzly locker in my dd/work stock truck. It's only a 500rwhp single wheel truck but it held up to what I put it through last year. It's very aggressive for street use though. It almost seems like its locked more than its unlocked. I'm wondering if my axles and carrier will live through this year towing 15k lbs.